• USA Home
  • 791547 - Titania paste, transparent

EMAIL THIS PAGE TO A FRIEND
791547 Sigma-Aldrich

Titania paste, transparent

Synonym: Greatcell Solar®, TiO2 paste

Purchase

Properties

Related Categories 3D Printing Materials for Research and Development, Alternative Energy, Conductive Inks for 3D Printing, Dye Sensitized Solar Cell (DSSC) Materials, Inks for Printing Applications,
description   Crystal Structure: > 99% anatase (analysis carried out on starting material, prior to paste manufacture)
InChI Key   GWEVSGVZZGPLCZ-UHFFFAOYSA-N
form   paste (yellow)
concentration   19.0 wt. %
avg. part. size   20 nm (active)
viscosity   40000-55000 mPa.s(20 °C) (Analysis carried out at 20°C with 20mm 4 degree cone/plate; 40 s-1))

Description

Packaging

10, 20 g in glass bottle

Legal Information

Product of Greatcell Solar® exclusive supplier of Sun2 products under license from EPFL

Greatcell Solar is a registered trademark of Greatcell Solar

Application

Use Transparent Titania Paste in applications that require a transparent sintered titania film with a large surface/volume ratio.

Transparent Titania Paste is formulated to yield sintered film thicknesses of 6-7μm when screen printed with a 43T mesh. Transparent Titania Paste has highly dispersed and stable anatase nanoparticles.

It is optimised for screen printing using a synthetic 43T mesh screen (or similar). After drying; this paste must be fired at or above 500°C. This results in a transparent sintered layer; with a film thickness of approximately 6-7μm for one printed layer and ~12μm for two printed layers; when using a 43T mesh screen.

The paste exhibits optimal rheological properties that provide good surface uniformity and contains organic binders specially formulated to provide versatile porosity suitable for a range of dye/electrolyte systems.

Storage: Store in the dark at 20°C

Safety & Documentation

Safety Information

Symbol 
GHS07  GHS07
Signal word 
Warning
Hazard statements 
RIDADR 
NA 1993 / PGIII
WGK Germany 
1
Flash Point(F) 
194 °F
Flash Point(C) 
90 °C

Same Products - New Packaging
Protocols & Articles

Articles

3D Printing of Carbon Fiber-Reinforced Composites

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries, most typically using a layer-by-layer fabrication process. 3D pri...
Zhenyu Bo* (Ph.D Candidate at Northwestern University) and Jia Choi*, PhD, Product Manager


*Materials Science Product Management Team, MilliporeSigma, Milwaukee, WI.
Keywords: Deposition, Nanomaterials, Nanotubes

Few Monolayer Atomic Layer Deposition (ALD) on Surfaces and Interfaces for Energy Applications

Department of Mechanical Engineering and Materials Science, One Brookings Drive, Washington University in St. Louis, St. Louis, MO 63130 *Email: parag.banerjee@wustl.edu
Keywords: Atomic layer deposition, Catalysis, Chemical reactions, Degradations, Dehydrogenation, Deposition, Hydrogenations, Ion Exchange, Ligands, Magnetic resonance spectroscopy, Materials Science, Nanomaterials, Oxidations, Photovoltaics, Precipitation, Recombination, Reductions, Renewable energy, Separation, Solar cells, Thin film deposition

Inverted Organic Photovoltaic Devices Using Zinc Oxide Nanocomposites as Electron Transporting Layer Materials

Bryce P. Nelson,1* Pengjie Shi,1 Wei Wei,1 Sai-Wing Tsang2 and Franky So3 1MilliporeSigma, 6000 N. Teutonia Ave., Milwaukee, WI, USA 53209 2Sai-Wing Tsang, Department of Physics and Materials Science...
Keywords: Adsorption, Crystallization, Diffusion, Materials Science, Nucleic acid annealing, Photovoltaics, Reductions, Sol-gel, Solar cells, Spectroscopy

Nanoparticle-based Zinc Oxide Electron Transport Layers for Printed Organic Photodetectors

Gerardo Hernandez-Sosa,1,2* Ralph Eckstein,1,2 Tobias Rödlmeier,1,2 Uli Lemmer1,2,3 1Lichttechnisches Institut, Karlsruher Institut für Technologie, Engesserstrasse 13, 76131 Karlsruhe, Germany 2Inno...
Gerardo Hernandez-Sosa*, Ralph Eckstein, Tobias Rödlmeier, Uli Lemmer
Material Matters, 2016, 11.2
Keywords: Deposition, Electronics, Positron Emission Tomography, Recombination, Reductions, Solar cells, Thin film deposition

Organic and Hybrid Electronics in Optical Analytical Applications

1Microelectronics Research Center and Department of Electrical & Computer Engineering, Iowa State University, Ames, IA, 50011, USA 2Department of Physics & Astronomy, Iowa State University, Ames, IA,...
Keywords: Absorption, Cardiovascular, Catalysis, Chromatin immunoprecipitation, Diagnostic, Electronics, Evaporation, Infrared spectroscopy, Materials Science, Oxidations, Recombination, Semiconductor, Sol-gel, Solar cells

Ruthenium-based dyes for Dye-sensitized Solar Cells

Dye-sensitized Solar Cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs. While present-day DSCs provide light-to-electricity conversion of ...
Dr. Hans Desilvestro and Dr. Yanek Hebting

Dyesol Ltd., 3 Dominion Place, Queanbeyan NSW 2620 AUSTRALIA
Keywords: Absorption, Calorimetry, Capillary electrophoresis, Ligands, Oxidations, Photosynthesis, Recombination, Reductions, Separation, Solar cells

Understanding and Successfully Applying Materials for Dye-Sensitized Solar Cells

Hans Desilvestro, Yanek Hebting, Mikael Khan, Damion Milliken Dyesol, Queanbeyan NSW 2620, Australia Email: yhebting@dyesol.com
Keywords: Absorption, Adhesion, Adsorption, Bacterial conjugations, Calorimetry, Deposition, Diffusion, Electronics, Extinction coefficient, Hydroxylations, Ligands, Mass spectrometry, Nucleic acid annealing, Oxidations, PAGE, Printed electronics, Recombination, Reductions, Semiconductor, Solar cells, Solvents

Peer-Reviewed Papers
15

References

Related Products

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?