• USA Home
  • 901091 - Zinc oxide ink for inkjet printing

901091 Sigma-Aldrich

Zinc oxide ink for inkjet printing

Synonym: Helios′Ink H-SZ01034 semiconductive ink, Zinc oxide dispersion, Zinc oxide suspension, ZnO ink, ZnO nanoparticle ink

  • Linear Formula ZnO



Related Categories 3D Printing Materials for Research and Development, Conductive Inks for 3D Printing, Inks for Buffer Layers, Inks for Printing Applications, Materials Science,
Quality Level   100
description   Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light)
  Valence band: 7.9 ± 0.1 eV
  Work function: 4.0 ± 0.1 eV
form   liquid (dispersion)
color   slightly yellow to clear
surface tension   29 mN/m±5 mN/m
viscosity   10.5 mPa.s±3.0 mPa.s(20 °C)
capacity   ≥0.9 % loading (Nanoparticles loading)


General description

Helios’Ink H-SZ01034, semi conductive ink developed for the printed electronics is particularly well suited for OPV and PV. Helios’Ink H-SZ01034, semi conductive ink shows great performance on Drop on Demand (DOD) inkjet printers, blade coating, and spin coating and is compatible with various flexible substrates (polyimide, PET, PET/ITO, etc.) but also Glass/ITO.

Features and Benefits

Product benefits:
• Easy deposition under atmospheric conditions (temperature and pressure).
• Good optical performances (visible light transmission >90%).
• Non CMR ink.
• Compatible with ITO layer and Ag NWs layer.
• Compatible with most flexible substrates.
• Low drying temperature making printing onto flexible substrates possible.
• Thin layers are obtained (20 nm) with low roughness (RMS = 3±1 nm).

Preparation Note

Typical processing guideline:
• Can be homogenized for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
• Filtration on a 0.45 μm PTFE filter syringe to avoid any nozzles clogging.
• Drying conditions: Oven, IR oven, vacuum oven.
• Clean-up solution: Ethanol/Acetone.

Legal Information

Product of Genes′Ink.

Safety & Documentation

Safety Information

Safety Information for this product is unavailable at this time.


Certificate of Analysis (COA)

Please Enter a Lot Number
Protocols & Articles


3D Printing of Carbon Fiber-Reinforced Composites

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries, most typically using a layer-by-layer fabrication process. 3D pri...
Zhenyu Bo* (Ph.D Candidate at Northwestern University) and Jia Choi*, PhD, Product Manager

*Materials Science Product Management Team, MilliporeSigma, Milwaukee, WI.
Keywords: Deposition, Nanomaterials, Nanotubes

Related Products

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?