• USA Home
  • 901971 - SunTronic® silver nanoparticle ink for inkjet printing

EMAIL THIS PAGE TO A FRIEND
901971 Sigma-Aldrich

SunTronic® silver nanoparticle ink for inkjet printing

sintering temperature: 150-250 °C

Synonym: Ag ink, Conductive ink, Silver ink, SunTronic®EMD5730

  • Empirical Formula (Hill Notation) Ag

  • Molecular Weight 107.87

  •  NACRES NA.23

Purchase

Properties

Related Categories Inks for Printing Applications, Materials Science, Organic and Printed Electronics, Printed Electronics
description   Sintering temperature: 150-250 °C for 10 – 60 min
  Solid content: 40%
  Volume Resistivity: 5 – 30 uΩ.cm
surface tension   28-31 dyn/cm
viscosity   11-13 cP (Brookfield)
storage temp.   2-8°C

Description

General description

SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.

Application

SunTronic® silver nanoparticle ink for inkjet printing (SunTronic® EMD5730) is a 3D additive printing technology that is used in a variety of applications such as flexible microsystems, and electronics. It is printed on a liquid crystal polymeric substrate for the formation of a low cost, adaptable tooling for effective deposition of a wide range of materials.

Caution

Printing
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.

Sintering:
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.

Storage at a cool room temperature 10-15°C is recommended. Refrigeration can be used but agitated to assure proper dispersion is recommended.

Legal Information

SunTronic is a registered trademark of Sun Chemical, Inc.

Safety & Documentation

Safety Information

Signal word 
Danger
Hazard statements 
Target organs 
Kidney
RIDADR 
UN1993 - class 3 - PG 2 - EHS - RQ - VP <= 110kPa - Flammable liquids, n.o.s., HI: all
WGK Germany 
WGK 3

Documents

Certificate of Analysis (COA)

Please Enter a Lot Number
Protocols & Articles

Articles

Advancements in the Fabrication of Integrated Organic Electronics

Research Center for Organic Electronics, Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan Email: y.takeda@yz.yamagata-u.ac.jp, tokito@yz.yamagata-u.ac.jp
Keywords: Amplification, Electronics, Industries, Mass spectrometry, Nucleic acid annealing, Organic electronics, Phase transitions, Semiconductor, Solar cells

Peer-Reviewed Papers
15

References

Related Products

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?