• USA Home
  • MPGL04GK2 - Millipak® 40 Gamma Gold Filter

EMAIL THIS PAGE TO A FRIEND
MPGL04GK2 Milli-Q

Millipak® 40 Gamma Gold Filter

Sterile 0.22 µm membrane filter for particulate-free and bacteria-free water at the point of dispense

  •  eCl@ss 33050190

  •  NACRES JA.14

Purchase

Properties

Quality Level   400
material   PVDF membrane
sterility   sterile
product line   Emprove® Filter
feature   hydrophilic
mfr. no.   Millipak®
parameter   0.35 bar max. differential pressure at 123 °C (Forward)
  0.7 bar max. differential pressure at 25 °C (Reverse)
  1.7 bar max. differential pressure at 80 °C (Forward)
  4.1 bar max. differential pressure at 25 °C (Forward)
  5.2 bar max. inlet pressure at 25 °C
inlet connection diam.   1/4  in.
outlet connection diam.   1/4 in.
impurities   <0.5  EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables   ≤1.5 mg/device
matrix   Durapore®
pore size   0.22 μm pore size
fitting   male NPT inlet connection
  outlet stepped hose barb (with bell)
compatibility   for use with Milli-Q® Element (2001-2009)
shipped in   ambient

Description

General description

Millipak® membrane products are designed for routine filtration applications in the laboratory. Millipak® filters are best-in-class proven products, used in lab water purification systems to provide particulate-free and bacteria-free water to benefit the stringent requirements of scientific applications.

Application

Provides bacteria- and particulate-free water suitable for techniques used in the laboratory where bacteria control is crucial (cell culture, microbiology media preparation, etc.).

Features and Benefits

• Millipak® membrane filters are made with Durapore® PVDF membranes to provide high flow rates and throughputs, low extractable and broad chemical compatibility.
• Gamma-irradiated for additional bacteria control.
• The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
• Millipak® membrane filters use the unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.
• Connects to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
• The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
• Care-free maintenance: the filter is easily fitted and replaced.
• Device configuration: Gamma Gold Capsule.
• Sterile unit. Delivered hermetically sealed, with its Certificate of Quality.

Other Notes

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratories analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes, and is considered to be a pesticide device under FIFRA . Refer to system equipment user guide section Using the System (available on USB key in the system box)
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.

Gravimetric Extractables: using sterilized device after a 200 mL flush and 24 hours in water at controlled room temperature

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Safety & Documentation

Safety Information

Safety Information for this product is unavailable at this time.
Protocols & Articles
Related Products

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?