• USA Home
  • XX1014700 - Millipore Classic Glass Filter Holder - Kit

EMAIL THIS PAGE TO A FRIEND
XX1014700 Millipore

Millipore Classic Glass Filter Holder - Kit

47 mm, Glass frit membrane support, 300 mL funnel

  •  eCl@ss 32031613

Purchase

Properties

Related Categories Filtration Supplies, Labware, Membrane Holders and Assemblies More...
Quality Level   100
material   anodized aluminum spring clamp(s)
  borosilicate glass base
  borosilicate glass funnel(s)
  glass seal
  silicone sleeve (for alignment)
  silicone stopper (parylene treated)
application(s)   filtration: suitable
H   22.9 cm
diam.   7.6 cm
filter diam.   47 mm
filtration area   9.6 cm2
funnel capacity   300 mL
fitting   inlet funnel
  No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone)
compatibility   for use with Classic Glass Filter Holder
shipped in   ambient

Description

General description

Millipore Classic Glass Filter Holders - Kit
47 mm, Glass frit membrane support, 300 mL funnel

The Classic Glass Filter Holder is an essential tool for every research lab. The holder′s multipurpose design is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application needs.

This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1014704 - Millipore Glass funnel, 300 mL, 47 mm, Borosilicate, Ground glass seal
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XX1014702 - Millipore Glass Base and Stopper, 47 mm, Glass frit membrane support
ALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PK

Features & Benefits:
• Designed for easy loading and removal of membranes
• Three membrane support materials options to suit a variety of applications
• UV sterilize or autoclave with filter in place for bacteriological analysis

Applications:
General Filtration and Clarification, Bacteriological Analysis, Particulate Contamination Analysis of Oils and Hydraulic Fluids, Exfoliative Cytology

Application

47 mm, Glass frit membrane support, 300 mL funnel

Principle

Vacuum

Preparation Note

Sterilization Method
UV sterilize or autoclave without filter in-place

Safety & Documentation

Safety Information

Safety Information for this product is unavailable at this time.
Protocols & Articles

Articles

D1691-17– Products and Materials Guide

These test methods cover the determination of zinc in water. Section 26 on Quality Control pertains to these test methods. Two test methods are given as follows: Either dissolved or total recoverable...
Keywords: Absorption, Atomic absorption spectroscopy, Ion-exchange chromatography

D1886-14– Products and Materials Guide

These test methods cover the atomic absorption determination of nickel in water and wastewaters. This is accomplished by aspirating the sample directly following an hydrochloric-nitric acid digestion...
Keywords: Absorption, Atomic absorption spectroscopy, Digestions, Filtration

D2274:14– Products and Materials Guide

This test method provides a basis for the estimation of the oxidation stability of middle distillate fuels such as No. 2 fuel oil. The test method may not provide a prediction of the quantity of inso...
Keywords: Oxidations

D3557:17– Products and Materials Guide

These test methods cover the determination of dissolved and total recoverable cadmium in water and wastewater by atomic-absorption spectrophotometry and differential pulse anodic stripping voltammetr...
Keywords: Absorption, Atomic absorption spectroscopy

D3645:18– Products and Materials Guide

These test methods cover the determination of dissolved and total recoverable beryllium in most waters and wastewaters. The values stated in SI units are to be regarded as standard. No other units of...
Keywords: Absorption, Atomic absorption spectroscopy

D3987-12– Products and Materials Guide

This practice is intended as a rapid means for obtaining an extract of solid waste. The extract may be used to estimate the release of constituents of the solid waste under the laboratory conditions ...
Keywords: Filtration

D4155-14 (2113)– Products and Materials Guide

This test method covers the determination of pentane insolubles for particles exceeding 1.8 μm in new and used lubricating oils. Pentane insolubles with particle sizes less than 1.8 μm may be studied...

D4817-15– Products and Materials Guide

This test method covers the determination of sediment in crude oils by membrane filtration. This test method has been validated for crude oils with sediments up to approximately 1.15 mass %. Measurin...
Keywords: Filtration

D4898-16– Products and Materials Guide

This test method covers the determination of insoluble contamination in hydraulic fluids by gravimetric analyses. The contamination determined includes both particulate and gel-like matter, organic a...

D5755:19– Products and Materials Guide

This test method covers a procedure to (a) identify asbestos in dust and (b) provide an estimate of the surface loading of asbestos in the sampled dust reported as the number of asbestos structures p...
Keywords: Air Monitoring, Microscopy, Sample preparations, Scanning electron microscopy, Transmission electron microscopy

F311:18– Products and Materials Guide

This method provides for the processing of liquid samples obtained in accordance with Practice F312 and Practices F313. It will provide the optimum sample processing for visual contamination methods ...
Keywords: Solvents

F313:18 (Reapproved 2116)– Products and Materials Guide

These practices cover sampling procedures for use in determining the particle cleanliness of liquids and liquid samples from components. Three practices, A, B, and C, have been developed on the basis...
Keywords: Sample preparations, Solvents

ASTM® D3223-17– Product & Materials Guide

ASTM® D3223-17 is used to determine mercury concentration in water via cold vapor atomic absorption spectroscopy (CV-AAS). This test method is applicable for measuring mercury ion concentrations betw...
Keywords: Absorption, Atomic absorption spectroscopy, Digestions, Filtration, Oxidations, Spectroscopy

ASTM® F312-08 – Product & Materials Guide

ASTM® F312-08 outlines methods for the visual determination of particle contamination in aerospace fluids, gases, surfaces, and environments. These microscope-based techniques are used to determine t...
Keywords: Filtration

NIOSH 2111– Products and Materials Guide

This test method uses ion chromatography and conductivity detection to monitor formic acid. Handle all hazardous chemicals in a fume hood. This is a modification of Method 7913 (Acids, inorganic) and...
Keywords: Chromatography, Ion-exchange chromatography

NIOSH 8311 (Issue 2)– Products and Materials Guide

This test method uses inductively-coupled argon plasma and atomic emission spectroscopy (ICP-AES) techniques to monitor exposure to the following metals or their compounds: aluminum, barium, cadmium,...
Keywords: Atomic emission spectroscopy, Emission spectroscopy, Inductively coupled plasma, Spectroscopy

Related Products

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?