• USA Home
  • SPE002L - VOAS in Soil - Low Level - PT

EMAIL THIS PAGE TO A FRIEND
SPE002L Supelco

VOAS in Soil - Low Level - PT

Proficiency Testing Material

Purchase

Properties

Related Categories Additional Standards, Analytical Standards, Analytical/Chromatography, Proficiency Testing, Solids/Soils Hazardous Waste Organic PTs,
packaging   ampule of 1 × 30 g
mfr. no.   RTC, SPE-002-L
concentration   in methanol
Featured Industry   Environmental
storage temp.   2-8°C

Description

General description

This proficiency testing sample is produced in accordance with ISO/IEC 17043:2010. All information regarding the use of this material can be found in the reporting packet supplied for each sample.

Other Notes

Proficiency testing samples are presented as single blind. No values for the samples are released until the testing period concludes. Values of analytes vary lot to lot.

Proficiency Testing Schedule (2018-2019)

Soils
LPTP18-S1 January 31 - March 16, 2018
LPTP18-S2 April 11 - May 25, 2018
LPTP18-S3 July 25 - September 7, 2018
LPTP18-S4 October 10 - November 23, 2018

LPTP19-S1 January 30 - March 15, 2019
LPTP19-S2 April 10 - May 24, 2019
LPTP19-S3 July 24 - September 6, 2019
LPTP19-S4 October 9 - November 22, 2019

Quick-Turn Study - (non-scheduled proficiency test that is available at any time)

Preparation Note

Randomly contains a minimum 60% of the analytes listed

This standard consists of a 2 mL flame-sealed ampule containing the Volatiles in Soil concentrate and a 30 mL ampule containing approximately 30 grams of Matrix soil. The solvent for the Volatiles in Soil concentrate is Methanol. This standard may not contain all of the compounds listed on the Data Reporting Forms. The evaluation of results will be based on study statistics as required by NELAC standards. This standard may not contain all of the compounds listed on the Report Forms in accordance with NELAC standards. For analytes not detected report as zero “0” or a “<” and your detection limit. This PT sample is intended for methods USEPA SW846 Method 8240 and 8260 using purge and trap extraction (EPA 5035).

Sample Preparation
The sample is to be extracted using the solid waste method for sediment/soil using purge and trap.
Weigh 5.0 grams of the Volatiles in Soil Matrix into a sparger cell. Carefully snap the top off of the Volatiles in Soil ampule.
Using a twenty five-microliter syringe, inject 20 μL of the concentrate into the matrix by placing the syringe tip slightly below the surface of the matrix in the sparger cell.
Immediately complete other sample preparation steps such as adding water to the sparger cell and closing the apparatus according to your analytical procedures. Complete the analysis per your normal procedures.
On the provided report form provides all of the requested information; note that the results of the analysis are to be reported on a wet weight basis.
In addition to all requested information, describe any unusual problems encountered in the extraction or analysis of the sample on the report form. The method used must be reported. If multiple methods are used for preparation and/or analysis, a separate report form must be used for each preparation and analysis method. Report on a wet weight basis; do not correct results for moisture content.

Analyte

Description

Product #

Add to Cart

Acetone 200-1000 μg/kg    
Acetonitrile 20-200 μg/kg    
Acrolein (Propenal) 20-200 μg/kg    
T-amylmethylether (TAME) 20-200 μg/kg    
Benzene 20-200 μg/kg    
Bromobenzene 40-200 μg/kg    
Bromochloromethane 20-400 μg/kg    
Bromodichloromethane 20-200 μg/kg    
Bromoform 20-200 μg/kg    
2-Butanone (Methyl ethyl ketone, MEK) 100-500 μg/kg    
n-Butylbenzene 20-400 μg/kg    
sec-Butylbenzene 20-400 μg/kg    
tert-Butylbenzene 20-400 μg/kg    
Carbon disulfide 20-200 μg/kg    
Carbon tetrachloride 20-200 μg/kg    
Chlorobenzene 20-200 μg/kg    
Chloroethane 80-200 μg/kg    
2-Chloroethyl vinyl ether 20-200 μg/kg    
Chloroform 20-200 μg/kg    
2-Chlorotoluene 20-400 μg/kg    
4-Chlorotoluene 20-400 μg/kg    
Cyclohexane 20-400 μg/kg    
1,2-Dibromo-3-chloropropane (DBCP) 40-200 μg/kg    
Dibromochloromethane 20-200 μg/kg    
1,2-Dibromoethane (EDB, Ethylene dibromide) 20-200 μg/kg    
Dibromomethane 20-200 μg/kg    
1,2-Dichlorobenzene 20-200 μg/kg    
1,3-Dichlorobenzene 20-200 μg/kg    
1,4-Dichlorobenzene 20-200 μg/kg    
Dichlorodifluoromethane 80-200 μg/kg    
1,1-Dichloroethane 20-200 μg/kg    
1,2-Dichloroethane 20-200 μg/kg    
1,1-Dichloroethylene 20-200 μg/kg    
cis-1,2-Dichloroethylene 20-200 μg/kg    
1,2-Dichloropropane 20-200 μg/kg    
1,3-Dichloropropane 20-400 μg/kg    
2,2-Dichloropropane 20-400 μg/kg    
1,1-Dichloropropene 20-400 μg/kg    
cis-1,3-Dichloropropene 20-200 μg/kg    
trans-1,3-Dichloropropene 20-200 μg/kg    
trans-1,2-Dichloroethylene 20-200 μg/kg    
1,4-Dioxane 20-400 μg/kg    
Ethylbenzene 20-200 μg/kg    
Hexachlorobutadiene 20-200 μg/kg    
Hexachloroethane 20-200 μg/kg    
Hexachloroethane 80-400 μg/kg    
2-Hexanone 100-500 μg/kg    
Cumene    
Di-isopropylether (DIPE) 20-200 μg/kg    
Methyl acetate 20-400 μg/kg    
Methyl bromide (Bromomethane) 80-200 μg/kg    
Methyl chloride (Chloromethane) 80-200 μg/kg    
Methylcyclohexane 20-400 μg/kg    
Methylene chloride (Dichloromethane) 20-200 μg/kg    
4-Methyl-2-pentanone (MIBK) 100-500 μg/kg    
Methyl tert-butyl ether (MTBE) 20-200 μg/kg    
Methyl tert-butyl ether (MTBE) 40-200 μg/kg    
n-Propylbenzene (1-Phenylpropane) 20-400 μg/kg    
Styrene 40-200 μg/kg    
1,1,1,2-Tetrachloroethane    
1,1,1,2-Tetrachloroethane 20-200 μg/kg    
1,1,2,2-Tetrachloroethane 20-200 μg/kg    
Tetrachloroethylene (Perchloroethylene) 20-200 μg/kg    
Toluene 20-200 μg/kg    
1,2,3-Trichlorobenzene 20-400 μg/kg    
1,2,4-Trichlorobenzene 40-200 μg/kg    
1,1,1-Trichloroethane 20-200 μg/kg    
1,1,2-Trichloroethane 20-200 μg/kg    
Trichloroethene (Trichloroethylene) 20-200 μg/kg    
Trichlorofluoromethane 80-200 μg/kg    
1,2,3-Trichloropropane 20-200 μg/kg    
Trichlorotrifluoroethane (Freon 113) 20-400 μg/kg    
1,2,4-Trimethylbenzene 20-200 μg/kg    
1,3,5-Trimethylbenzene 20-200 μg/kg    
Vinyl acetate 20-200 μg/kg    
Vinyl chloride 80-200 μg/kg    
m+p-Xylene 20-200 μg/kg    
o-Xylene 20-200 μg/kg    
Xylene, total 40-400 μg/kg    
Safety & Documentation

Safety Information

Symbol 
Signal word 
Danger
Hazard statements 
RIDADR 
UN1230 - class 3 - PG 2 - Methanol, solution
WGK Germany 
2
Flash Point(F) 
51.8 °F
Flash Point(C) 
11 °C

Documents

Certificate of Analysis

Protocols & Articles
Related Products

related product

Product #

Description

Add to Cart

43917 SnapIT Ampule Opener, large, for 5-10ml, 10-15ml, 20-25ml ampoules

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?