P3C030D05
Placa Pellicon® 3 con membrana Ultracel®
filtration area 0.57 m2, NMWCO 30 kDa, Holdup volume 118 mL
Sinónimos:
Pellicon® 3 Cassette with Ultracel 30 kDa Membrane, D screen, 0.57 m2, Pellicon® 3 Ultracel® Membrane Cassette, Pellicon® 3 Ultrafiltration Cassette
Seleccione un Tamaño
| Talla/SKU | Disponibilidad | Precio |
|---|
Acerca de este artículo
Quality Segment
material
TPE seal, composite regenerated cellulose (CRC) , polypropylene screen, stainless steel cap (for end; polypropylene-encapsulated)
sterility
non-sterile
product line
Pellicon®
feature
holdup volume 118 mL (in feed channel)
manufacturer/tradename
Pellicon®
parameter
30 psi max. reverse press. exposure at 25 °C (for 24 hours), 4-6 L/min-m2 recirculation rate, 40 psi max. transmembrane pressure at 4-50 °C, 6.9 bar max. inlet pressure (100 psi), 80 psi max. transmembrane pressure at 4-40 °C
technique(s)
analytical sample preparation: suitable, buffer exchange: suitable, protein purification: suitable (concentration), tangential flow filtration (TFF): suitable
H
2.6 cm (1.01 in.)
L
20.6 cm (8.1 in.)
W
17.8 cm (7 in.)
filtration area
0.57 m2
membrane area
0.57 m2
gravimetric extractables
≤1500 mg/m2
matrix
Ultracel® (Membrane)
pore size
30 kDa NMWCO
pH
2-13
application(s)
mAb
recombinant protein
General description
Application
- Monoclonal antibodies (mAbs)
- Recombinant and non-recombinant proteins
- Plasma
- Vaccine process streams
Features and Benefits
- Rugged & reliable – ideally suited for today′s more demanding filtration processes
- High performance – produces excellent resolution, yields and back-pressure resistance
- Optimum product recovery – thanks to proven membrane technology
- Void-free technology – leading-edge membranes resolve virtually any separation challenge
- Defect-free, superior adhesion – Ultracel®uses composite membranes cast on a microporous substrate
- Automated manufacturing – delivers unbeatable performance, consistency and reliability
- Easy installation & care – simple to install and maintain
Analysis Note
Other Notes
Legal Information
1 of 1
Este artículo | |||
|---|---|---|---|
| description filtration area 0.57 m2, NMWCO 30 kDa, Holdup volume 118 mL | description filtration area 0.57 m2, NMWCO 10 kDa | description filtration area 0.57 m2, NMWCO 30 kDa | description filtration area 0.11 m2, NMWCO 30 kDa |
| pore size 30 kDa NMWCO | pore size 10 kDa NMWCO | pore size 30 kDa NMWCO | pore size 30 kDa NMWCO |
| technique(s) buffer exchange: suitable, analytical sample preparation: suitable, protein purification: suitable (concentration) | technique(s) buffer exchange: suitable, analytical sample preparation: suitable, protein purification: suitable (concentration) | technique(s) buffer exchange: suitable, protein purification: suitable (concentration), analytical sample preparation: suitable | technique(s) analytical sample preparation: suitable, buffer exchange: suitable, protein purification: suitable (concentration) |
| filtration area 0.57 m2 | filtration area 0.57 m2 | filtration area 0.57 m2 | filtration area 0.11 m2 |
| matrix Ultracel® (Membrane) | matrix Ultracel® (Membrane) | matrix Ultracel® (Membrane) | matrix Ultracel® (Membrane) |
| material polypropylene screen, TPE seal, composite regenerated cellulose (CRC) , stainless steel cap (for end; polypropylene-encapsulated) | material composite regenerated cellulose (CRC) , polypropylene screen, TPE seal, stainless steel cap (for end; polypropylene-encapsulated) | material stainless steel cap (for end; polypropylene-encapsulated), TPE seal, polypropylene screen, composite regenerated cellulose (CRC) | material TPE seal, polypropylene cap (for end), polypropylene screen, composite regenerated cellulose (CRC) |
| parameter 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 4-6 L/min-m2 recirculation rate, 80 psi max. transmembrane pressure at 4-40 °C, 6.9 bar max. inlet pressure (100 psi), 40 psi max. transmembrane pressure at 4-50 °C | parameter 4-6 L/min-m2 recirculation rate, 80 psi max. transmembrane pressure at 4-40 °C, 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 6.9 bar max. inlet pressure (100 psi), 40 psi max. transmembrane pressure at 4-50 °C | parameter 6.9 bar max. inlet pressure (100 psi), 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 40 psi max. transmembrane pressure at 4-50 °C, 80 psi max. transmembrane pressure at 4-40 °C, 4-6 L/min-m2 recirculation rate | parameter 40 psi max. transmembrane pressure at 4-50 °C, 4-6 L/min-m2 recirculation rate, 6.9 bar max. inlet pressure (100 psi), 80 psi max. transmembrane pressure at 4-40 °C, 30 psi max. reverse press. exposure at 25 °C (for 24 hours) |
Still not finding the right product?
Explore all of our products under Placa Pellicon® 3 con membrana Ultracel®
Clase de almacenamiento
10 - Combustible liquids
¿Qué está pasando?
WGK 2
Cumpla las GMP con el programa Emprove®.
Acelere la cualificación, mantenga la conformidad y ahorre tiempo con Emprove® Dossiers.
Nota: será redirigido a EmproveSuite.com. Su nombre de usuario y contraseña son independientes de SigmaAldrich.com y pueden diferir.
Regístrese gratis y acceda a Emprove® Dossiers en cuestión de minutos. Actualice su plan de suscripción para desbloquear contenidos avanzados y personalizados en la Emprove® Suite
¿No encuentra lo que busca? Visite la página de ayuda del programa Emprove®..
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
¿Le resulta difícil encontrar su producto o lote/número de lote?
Cómo encontrar el número de producto
Las referencias de los producto se combinan con los tamaños de envase y las cantidades cuando se muestran en la página web, por ejemplo: T1503-25G. Asegúrese de introducir el número de producto ÚNICAMENTE en el campo del Número de producto (ejemplo: T1503).
Ejemplo:
Otros ejemplos
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
introducir como 1.000309185)
¿Tienes problemas? Siéntase libre de contactar Servicio técnico para asistencia