Saltar al contenido
Merck

Process development for biological production of butanol from Eastern redcedar.

Bioresource technology (2014-12-03)
Kan Liu, Hasan K Atiyeh, Oscar Pardo-Planas, Karthikeyan D Ramachandriya, Mark R Wilkins, Thaddeus C Ezeji, Victor Ujor, Ralph S Tanner
RESUMEN

Eastern redcedar is an invasive softwood species in Oklahoma and across grasslands in the Central Plains of the United States and potential feedstock for butanol production. Butanol has higher energy content than ethanol and can be upgraded to jet and diesel fuels. The objective of this study was to develop a process for production of butanol from redcedar. Results showed that Clostridium acetobutylicum ATCC 824 and Clostridium beijerinckii NCIMB 8052 did not grow in fermentation medium with citrate buffer. However, both strains grew in the medium with acetate buffer, resulting in 3-4g/L greater butanol than without acetate. Detoxification of redcedar hydrolyzate was required to increase butanol concentration from 1 to 13g/L. Hydrolyzate was detoxified by activated carbon to remove inhibitors. Fermentations in detoxified redcedar hydrolyzate reached 13g/L butanol and 19g/L total ABE, comparable to glucose control. This shows the potential for redcedar use in butanol production.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido clorhídrico, ACS reagent, 37%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Ácido clorhídrico, ACS reagent, 37%
Sigma-Aldrich
Cloruro de hidrógeno solution, 4.0 M in dioxane
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ácido clorhídrico solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Ácido clorhídrico, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Ácido clorhídrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Cloruro de hidrógeno solution, 2.0 M in diethyl ether
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Ácido clorhídrico, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Ácido clorhídrico, 36.5-38.0%, BioReagent, Molecular Biology
Supelco
Ácido clorhídrico solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Cloruro de hidrógeno solution, 1.0 M in diethyl ether
Sigma-Aldrich
Ácido clorhídrico solution, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
Levulinic acid, 98%
Sigma-Aldrich
Cloruro de hidrógeno solution, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Levulinic acid, ≥97%, FG
Sigma-Aldrich
Ácido clorhídrico solution, 32 wt. % in H2O, FCC
Sigma-Aldrich
Ácido fórmico, ≥95%, FCC, FG
Sigma-Aldrich
Cloruro de hidrógeno solution, 1.0 M in acetic acid
Supelco
Levulinic acid, analytical standard
Sigma-Aldrich
Ácido clorhídrico, puriss., 24.5-26.0%
Supelco
Hydrogen chloride – ethanol, ~1.25 M HCl, derivatization grade (GC derivatization), LiChropur
Sigma-Aldrich
Levulinic acid, natural, 99%, FG
Sigma-Aldrich
Formic acid solution, BioUltra, 1.0 M in H2O