Skip to Content
Merck
  • Elevated levels of plasma lipofuscins in patients with chronic renal failure.

Elevated levels of plasma lipofuscins in patients with chronic renal failure.

Archives internationales de physiologie et de biochimie (1988-12-01)
Z L Hegedus, H A Frank, T I Steinman, M D Altschule, U Nayak
ABSTRACT

The fluorescence excitation and emission spectra observed in plasma from patients with chronic renal failure were reproduced by the generation of soluble lipofuscins in normal plasma samples by incubation with mixtures of L-dopa, dopamine, L-norepinephrine, L-epinephrine, 3-hydroxy-DL-kynurenine and 3-hydroxy-anthranilic acid for 24 h at 37 degrees C. Relative fluorescence intensity measurements consistently showed elevated plasma levels of the soluble lipofuscins in chronic renal failure: the means (n = 27) were 73.9 +/- 33.4 (SD) and 71.1 +/- 14.8 at emissions 413 nm and 445 nm respectively, in contrast to those of normal plasma samples (n = 11), 18.2 +/- 5.3 and 23.1 +/- 5.6. The maximum or shoulder at approximately 413 nm represents soluble lipofuscin that can be generated from 3-hydroxyanthranilic acid and the maximum or shoulder at approximately 445 nm represents soluble lipofuscins derived from the precursors listed above and probably from other related precursors. Gravimetric measurements also showed elevated levels of melanins in the plasma samples of patients with chronic renal failure: 2.72 +/- 0.38 mg/ml (n = 16), as compared to normal values: 1.70 +/- 0.10 mg/ml (n = 6). In individual patients haemodialysis reduced the fluorescence intensities to a range of 65-99% and the melanin levels to a range of 86-99% of the pre-dialysis values.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Betaine, BioUltra, ≥99.0% (NT)
Sigma-Aldrich
Betaine, ≥98% (perchloric acid titration)
Sigma-Aldrich
DL-Homocysteine, ≥95% (titration)
Sigma-Aldrich
Adenosine 3′,5′-cyclic monophosphate, ≥98.5% (HPLC), powder
Sigma-Aldrich
Guanidineacetic acid, 99%
Sigma-Aldrich
Zinc, powder, <150 μm, 99.995% trace metals basis
Sigma-Aldrich
Zinc, wire, diam. 1.0 mm, 99.995% trace metals basis
Sigma-Aldrich
Zinc, purum, powder
Sigma-Aldrich
Zinc, granular, 30-100 mesh, 99%
Sigma-Aldrich
Zinc, foil, thickness 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
Zinc, mossy, ≥99%
Sigma-Aldrich
Zinc preparation, 5 g/dL Zn2+ in THF, highly reactive Rieke®metal
Sigma-Aldrich
Betaine solution, 5 M, PCR Reagent
Sigma-Aldrich
Zinc, dust, <10 μm, ≥98%
Sigma-Aldrich
Zinc, pieces, 2-14 mesh, 99.9% trace metals basis
Sigma-Aldrich
Zinc, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.9%, granular
Sigma-Aldrich
Zinc, nanopowder, 40-60 nm avg. part. size, ≥99% trace metals basis
Sigma-Aldrich
Zinc, granular, 20-30 mesh, ACS reagent, ≥99.8%
Sigma-Aldrich
Zinc, shot, <12 mm, 99.99% trace metals basis
Sigma-Aldrich
Zinc, shot, 5 mm, 99.999% trace metals basis
Sigma-Aldrich
Zinc, sticks, diam. 7-10 mm, 99.97% trace metals basis
Sigma-Aldrich
Zinc, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Zinc, foil, thickness 1.0 mm, 99.99% trace metals basis