Skip to Content
Merck
  • Mechanisms of Cu2+ migration, recovery and detoxification in Cu2+-, SO4(2-) -containing wastewater treatment process with anaerobic granular sludge.

Mechanisms of Cu2+ migration, recovery and detoxification in Cu2+-, SO4(2-) -containing wastewater treatment process with anaerobic granular sludge.

Environmental technology (2014-06-25)
Xiaolei Cao, Hongbin Cao, Yuxing Sheng, Yongbing Xie, Kai Zhang, Yi Zhang, John C Crittenden
ABSTRACT

In this study, anaerobic granular sludge with sulphate-reducing bacteria (SRB) was applied to treat Cu2+-, SO4(2-) -containing wastewater in an expanded granular sludge bed reactor. The migration and enrichment of copper in anaerobic granular sludge were envaluated. By analysing the sludge with X-ray diffraction, copper was determined to be present as covellite (CuS) in the sludge. Observations at the microscopic level showed that CuS precipitates were absorbed onto granules and gradually migrated from the outer to the interior layer of the granule over time and finally accumulated in the core of the granular sludge. Because of the migration of the CuS precipitates and the protection of the extracellular polymeric substances matrix, SRB were able to tolerate copper concentrations up to 10 mg/L. A copper removal efficiency of about 96% was observed at a steady state for 3 months, and copper was enriched in the granular sludge.

MATERIALS
Product Number
Brand
Product Description

Copper, wire reel, 50m, diameter 0.15mm, annealed, silver plated, 99.9%
Continuous cast copper (O), BCR®, certified reference material, rod
Copper - O.F.H.C., foil, 150x150mm, thickness 0.25mm, annealed, 99.95+%
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Copper, rod, 100mm, diameter 16mm, as drawn, 99.99+%
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Sigma-Aldrich
Copper, beads, 2-8 mm, 99.9995% trace metals basis
Sigma-Aldrich
Copper, beads, 2-8 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 2.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis
Copper - O.F.H.C., foil, 25x25mm, thickness 0.25mm, annealed, 99.95+%
Copper, wire reel, 500m, diameter 0.5mm, annealed, 99.9%
Copper - O.F.H.C., foil, 100x100mm, thickness, 0.5mm, half hard, flattened, polished on both sides, 99.95+%
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Copper, wire reel, 1000m, diameter 0.125mm, annealed, 99.9%
Sigma-Aldrich
Copper, wire, diam. 0.64 mm, 99.995% trace metals basis
Copper, wire reel, 1m, diameter 0.01mm, hard, 99.99%
Copper - O.F.H.C., foil, light tested, 150x150mm, thickness 0.05mm, annealed, 99.95+%
Copper, rod, 100mm, diameter 4.8mm, hard, 99.9%
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Copper, wire reel, 200m, diameter 0.5mm, annealed, silver plated, 99.9%
Copper - O.F.H.C., wire reel, 10m, diameter 0.25mm, as drawn, 99.95+%
Copper, wire reel, 5m, diameter 0.05mm, as drawn, 99.99+%
Copper - O.F.H.C., tube, 500mm, outside diameter 4.0mm, inside diameter 3mm, wall thickness 0.5mm, 99.95+%
Copper, tube, 1000mm, outside diameter 6.0mm, inside diameter 4mm, wall thickness 1.0mm, as drawn, 99.9%
Copper, microfoil, disks, 10mm, thinness 0.25μm, specific density 219.9μg/cm2, permanent mylar 3.5μm support, 99.99+%
Copper - O.F.H.C., foil, 50x50mm, thickness 2.0mm, half hard, 99.95+%