Skip to Content
Merck
  • Significance of αThr-349 in the catalytic sites of Escherichia coli ATP synthase.

Significance of αThr-349 in the catalytic sites of Escherichia coli ATP synthase.

Biochemistry (2014-11-07)
Zulfiqar Ahmad, Mumeenat Winjobi, M Anaul Kabir
ABSTRACT

This paper describes the role of α-subunit VISIT-DG sequence residue αThr-349 in the catalytic sites of Escherichia coli F1Fo ATP synthase. X-ray structures show the highly conserved αThr-349 in the proximity (2.68 Å) of the conserved phosphate binding residue βR182 in the phosphate binding subdomain. αT349A, -D, -Q, and -R mutations caused 90-100-fold losses of oxidative phosphorylation and reduced ATPase activity of F1Fo in membranes. Double mutation αT349R/βR182A was able to partially compensate for the absence of known phosphate binding residue βR182. Azide, fluoroaluminate, and fluoroscandium caused insignificant inhibition of αT349A, -D, and -Q mutants, slight inhibition of the αT349R mutant, partial inhibition of the αT349R/βR182A double mutant, and complete inhibition of the wild type. Whereas NBD-Cl (7-chloro-4-nitrobenzo-2-oxa-1,3-diazole) inhibited wild-type ATPase and its αT349A, -D, -R, and -Q mutants essentially completely, βR182A ATPase and double mutant αT349A/βR182A were inhibited partially. Inhibition characteristics supported the conclusion that NBD-Cl reacts in βE (empty) catalytic sites, as shown previously by X-ray structure analysis. Phosphate protected against NBD-Cl inhibition in the wild type, αT349R, and double mutant αT349R/βR182A but not in αT349A, αT349D, or αT349Q. The results demonstrate that αThr-349 is a supplementary residue involved in phosphate binding and transition state stabilization in ATP synthase catalytic sites through its interaction with βR182.

MATERIALS
Product Number
Brand
Product Description

Aluminum, microleaf disks, 10mm, thinness 1.0μm, specific density 269.9μg/cm2, removable support, 99.999%
Aluminum, mesh, 900x900mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminum, microfoil, disks, 25mm, thinness 1.0μm, specific density 269.9μg/cm2, permanent mylar 3.5μm support, 99.999%
Aluminum, insulated wire, 2m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, microleaf disks, 25mm, thinness 0.15μm, specific density 41.28μg/cm2, removable support, 99.999%
Aluminum, microleaf disks, 25mm, thinness 0.5μm, specific density 120.6μg/cm2, removable support, 99.999%
Aluminum, insulated wire, 1m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, insulated wire, 20m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Supelco
L-Threonine, Pharmaceutical Secondary Standard; Certified Reference Material
Aluminum, honeycomb, 300x300mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%
Aluminum, honeycomb, 600x600mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%
Aluminum, honeycomb, 300x300mm, thickness 5mm, cell size 19mm, cell wall 0.064mm, core density 0.029g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, honeycomb, 300x300mm, thickness 20mm, cell size 4.8mm, cell wall 0.038mm, core density 0.070g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, honeycomb, 600x600mm, thickness 10mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, honeycomb, 600x600mm, thickness 52.3mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin glass fiber 0.75mm, 99.9%
Aluminum, honeycomb, 300x300mm, thickness 10mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, foam, 150x150mm, thickness 6.35mm, bulk density 0.2g/cm3, porosity 0.93, 8 pores/cm, aluminum 6101 grade, 98.5%
Aluminum, rod, 100mm, diameter 12.0mm, as drawn, 99.999%
Aluminum, tube, 200mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%
Aluminum, rod, 200mm, diameter 10.0mm, as drawn, 99.999%
Aluminum, rod, 100mm, diameter 12.7mm, 99%
Aluminum, tube, 200mm, outside diameter 0.30mm, inside diameter 0.2mm, wall thickness 0.05mm, as drawn, 99.5%
Aluminum, wire reel, 0.5m, diameter 0.5mm, as drawn, 99.999%
Aluminum, tube, 1000mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%
Aluminum, tube, 500mm, outside diameter 0.55mm, inside diameter 0.4mm, wall thickness 0.075mm, as drawn, 99.5%
Aluminum, rod, 200mm, diameter 12.7mm, 99%
Aluminum, rod, 100mm, diameter 20.0mm, as drawn, 99.999%
Aluminum, rod, 200mm, diameter 12.0mm, as drawn, 99.999%
Aluminum, wire reel, 100m, diameter 0.25mm, as drawn, 99.5%
Aluminum, sphere, 100pcs, diameter 3.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%