Mixture A is prepared by adding 5ml of the Epoxy Embedding Medium with 8 ml of DDSA. Mix well for at least 20 minutes. Mixture B is prepared by adding 8ml of Epoxy Embedding Medium with 7ml of NMA. Immediately before use mix 13 ml of Mixture A with 15 ml of Mixture B. Carefully add 16 drops of DPM-30 (1.5% to 2.0%). The DPM-30 (accelerator) should be added carefully since the block can become discolored if not measured properly and the block may be too brittle for satisfactory sectioning.
Please refer to the usage protocol here:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/433/080/45359dat.pdf
45359
Epoxy Embedding Medium kit
embedding resin for electron microscopy
Sinónimos:
Epon™ substitute embedding medium kit
Iniciar sesión para ver los precios por organización y contrato.
Seleccione un Tamaño
Cambiar Vistas
| Talla/SKU | Disponibilidad | Precio |
|---|---|---|
1 kit | Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad | 224,00 € |
Acerca de este artículo
NACRES:
NA.47
UNSPSC Code:
12171500
224,00 €
Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad
Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarleQuality Segment
pH
5-7
density
1.9 g/cm3
application(s)
hematology
histology
tissue diagnostics
storage temp.
2-8°C
General description
The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).
Application
Epoxy Embedding Medium Kit has been used in the following applications:
- to study the role of NDRG2, an essential colonic epithelial barrier regulator, in gut homeostasis maintenance and colitis-associated tumor development
- to study the interaction of polymer scaffold nanofibers with growing cells
- to study the morphological characterization of postembryonic development of blood–spleen barrier in ducks
- to understand the role of NOD1/NOD2 receptors in Fusobacterium nucleatum-mediated neutrophil extracellular traps
Features and Benefits
- Excellent medium for embedding a wide variety of tissues, including both plant and animal.
- Facilitates rapid embedding (less than 3 hours).
- Low viscosity facilitates rapid tissue penetration.
- Desirable hardness is easy to obtain to suit a specific tissue type.
Other Notes
45345 Epoxy Embedding Medium 2x250 ml
45347 Hardener MNA 250 ml
45346 Hardener DDSA 250 ml
45348 Accelerator DMP 30 250 ml
45347 Hardener MNA 250 ml
45346 Hardener DDSA 250 ml
45348 Accelerator DMP 30 250 ml
Legal Information
Epon is a trademark of Hexion, Inc.
1 of 1
Este artículo | |||
|---|---|---|---|
| description embedding resin for electron microscopy | description suitable for microscopy | description ≥95.0% | description ≥95% (NT) |
| pH 5-7 | pH - | pH - | pH - |
| application(s) hematology | application(s) hematology | application(s) hematology | application(s) hematology |
| density 1.9 g/cm3 | density - | density 1.232 g/mL at 25 °C (lit.) | density 0.969 g/mL at 25 °C (lit.) |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| storage temp. 2-8°C | storage temp. room temp | storage temp. room temp | storage temp. 2-8°C |
Palabra de advertencia
Danger
Códigos de peligro
Indicaciones de precaución
Hazard Classifications
Acute Tox. 4 Oral - Aquatic Chronic 4 - Eye Dam. 1 - Resp. Sens. 1 - Skin Corr. 1B - Skin Sens. 1 - STOT SE 3
Órganos diana
Respiratory system
Clase de almacenamiento
8A - Combustible corrosive hazardous materials
Punto de inflamación (°F)
275.0 °F
Punto de inflamación (°C)
135 °C
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
-
Should I first prepare Mixture A: and separately Mixture B: and then use these mixtures to infiltrate the tissue in ratios 1:1 and 1:2, or should I mix all four components together at once and then perform the infiltration? I am not clear about this step
1 respuesta-
¿Le ha resultado útil?
-
-
Hallo, gelten nach dem Aushärten die gleichen H- und P-Sätze wie für das Kit?
1 respuesta-
After curing, the hazard and precautionary statements will still apply to this kit.
¿Le ha resultado útil?
-