Saltar al contenido
Merck

Critical chromatography in ternary solvents.

Journal of chromatography. A (2013-03-08)
Matthäus Mlynek, Wolfgang Radke
RESUMEN

The behaviour of PMMA standards in mixtures composed of two binary critical eluents was investigated. It was found that combinations of two critical eluents do not result in a molar mass independent elution (critical conditions). When mixing two binary critical eluents, elution might occur in SEC, LAC or close to critical conditions in a non-predictable fashion. It can be assumed that the deviation from critical conditions is caused by preferential adsorption of some eluent components to the stationary phase or the polymer. In order to have a fast estimate, in which mode of chromatography elution will occur when mixing two critical eluents, ternary critical conditions were estimated from gradient experiments. A good agreement was observed between the so obtained critical lines and the elution behaviour resulting in mixtures of two critical eluents.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Tetrahidrofuran, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetato de etilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetato de etilo, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Tetrahidrofuran, contains 200-400 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Acetato de etilo, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Tetrahidrofuran, anhydrous, ≥99.9%, inhibitor-free
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Acetato de etilo, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Cloroformo, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformo, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformo, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Supelco
Acetato de etilo, analytical standard
Sigma-Aldrich
Tetrahidrofuran, ACS reagent, ≥99.0%, contains 200-400 ppm BHT as inhibitor
Sigma-Aldrich
Cloroformo, biotech. grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Acetato de etilo, ≥99%, FCC, FG
Sigma-Aldrich
Acetato de etilo, ACS reagent, ≥99.5%
Supelco
Cloroformo, analytical standard
Supelco
Tetrahidrofuran, analytical standard
Sigma-Aldrich
Cloroformo, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
Acetato de etilo, natural, ≥99%, FCC, FG
Sigma-Aldrich
Acetato de etilo, biotech. grade, ≥99.8%
Supelco
Tetrahidrofuran, Selectophore, ≥99.5%
Sigma-Aldrich
Acetato de etilo, ReagentPlus®, ≥99.8%