Saltar al contenido
Merck
  • Ion-pairing reversed-phase liquid chromatography fractionation in combination with isotope labeling reversed-phase liquid chromatography-mass spectrometry for comprehensive metabolome profiling.

Ion-pairing reversed-phase liquid chromatography fractionation in combination with isotope labeling reversed-phase liquid chromatography-mass spectrometry for comprehensive metabolome profiling.

Journal of chromatography. A (2011-05-06)
Kevin Guo, Jun Peng, Ruokun Zhou, Liang Li
RESUMEN

We report a novel two-dimensional (2D) separation strategy aimed at improving the detectability of liquid chromatography mass spectrometry (LC-MS) for metabolome analysis. It is based on the use of ion-pairing (IP) reversed-phase (RP) LC as the first dimension separation to fractionate the metabolites, followed by isotope labeling of individual fractions using dansylation chemistry to alter the physiochemical properties of the metabolites. The labeled metabolites having different hydrophobicity from their unlabeled counterparts are then separated and analyzed by on-line RPLC Fourier-transform ion-cyclotron resonance mass spectrometry (FTICR-MS). This off-line 2D-LC-MS strategy offers significant improvement over the one-dimensional (1D) RPLC MS technique in terms of the number of detectable metabolites. As an example, in the analysis of a human urine sample, 3564 ¹³C-/¹²C-dansylated ion pairs or metabolites were detected from seven IP RPLC fractions, compared to 1218 metabolites found in 1D-RPLC-MS. Using a library of 220 amine- and phenol-containing metabolite standards, 167 metabolites were positively identified based on retention time and accurate mass matches, which was about 2.5 times the number metabolites identified by 1D-RPLC-MS analysis of the same urine sample.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Hydroxylamine solution, 50 wt. % in H2O
Sigma-Aldrich
4-Nitrophenol, ReagentPlus®, ≥99%
Sigma-Aldrich
Diethanolamine, reagent grade, ≥98.0%
Sigma-Aldrich
o-Cresol, ReagentPlus®, ≥99%
Sigma-Aldrich
3,4-Dihydroxybenzoic acid, ≥97.0% (T)
Sigma-Aldrich
Hydroxylamine solution, 50 wt. % in H2O, 99.999%
Supelco
Hydrochlorothiazide, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
4-Nitrophenol solution, 10 mM
Sigma-Aldrich
2-Aminoisobutyic acid, 98%
Sigma-Aldrich
Diethanolamine, BioUltra, ≥99.5% (GC)
Sigma-Aldrich
3-(4-Hydroxyphenyl)propionic acid, 98%
Sigma-Aldrich
o-Cresol, ≥99%
Sigma-Aldrich
4-Nitrophenol, spectrophotometric grade
Sigma-Aldrich
Diethanolamine, ACS reagent, ≥98.5%
Protocatechuic acid, primary reference standard
Sigma-Aldrich
Diethanolamine, puriss. p.a., ACS reagent, ≥99.0% (GC)
Supelco
o-Cresol, analytical standard
Supelco
4-Nitrophenol, PESTANAL®, analytical standard
Sigma-Aldrich
2-Phenylglycine, 95%
Supelco
4-Nitrophenol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Hydrochlorothiazide, crystalline
Supelco
3,4-Dihydroxybenzoic acid, analytical standard
Supelco
Diethanolamine, analytical standard
Sigma-Aldrich
3-Hydroxy-4-methoxycinnamic acid, predominantly trans, 97%
Supelco
Hydrochlorothiazide solution, 1.0 mg/mL in methanol, ampule of 1 mL, certified reference material, Cerilliant®
Sigma-Aldrich
DL-2-Aminocaprylic acid, 99%
Sigma-Aldrich
DL-o-Tyrosine, ≥96.0% (NT)
Sigma-Aldrich
Hydrochlorothiazide, meets USP testing specifications