Saltar al contenido
Merck

Determination of monoaromatic hydrocarbons (BTEX) in surface waters from a Brazilian subtropical hydrographic basin.

Bulletin of environmental contamination and toxicology (2014-02-18)
Andreia Neves Fernandes, Cindy Duarte Gouveia, Marco Tadeu Grassi, Janaina da Silva Crespo, Marcelo Giovanela
RESUMEN

This study examined surface water samples for the presence of the monoaromatic hydrocarbons benzene, toluene, ethylbenzene and xylene. Water samples were collected from the sub-basin of the Tegas River and the Marrecas Stream microbasin located in the metropolitan region of the municipality of Caxias do Sul (Rio Grande do Sul State, Brazil). For all sampling points evaluated, only toluene was detected, with concentrations values in the range of 1.70-18.44 μg L(-1). In general, the relatively high toluene concentration for the samples collected were above the limit of 2 μg L(-1) established by the Brazilian government for Class I rivers for the protection of aquatic life. However, they were well below the established limit of 170 μg L(-1) in water used for human consumption.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Tolueno, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Benceno, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Benceno, ACS reagent, ≥99.0%
Supelco
Benceno, analytical standard
Sigma-Aldrich
Benceno, anhydrous, 99.8%
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Benceno, puriss. p.a., reag. Ph. Eur., ≥99.7%
Sigma-Aldrich
Ethylbenzene, ReagentPlus®, 99%
Supelco
Benzene solution, certified reference material, TraceCERT®, 200 μg/mL in methanol
Supelco
Benceno, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Tolueno, analytical standard
Sigma-Aldrich
Ethylbenzene, anhydrous, 99.8%
Supelco
Tolueno, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Ethylbenzene, analytical standard
Supelco
Tolueno, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Toluene solution, certified reference material, 5000 μg/mL in methanol
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Supelco
Ethylbenzene solution, suitable for NMR (reference standard), 0.1% in chloroform-d (99.8 atom % D), TMS 0.01 %, NMR tube size 5 mm × 8 in.
Supelco
Toluene solution, certified reference material, TraceCERT®, 200 μg/mL in methanol, ampule of 1 mL
Supelco
Ethylbenzene, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 10% in chloroform-d (99.8 atom % D)
Supelco
Ethylbenzene solution, suitable for NMR (reference standard), 10% in chloroform-d (99.8 atom % D), NMR tube size 5 mm × 8 in. , ultra-thin wall
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 0.1% in chloroform-d (99.8 atom % D), TMS 0.1 %
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 0.1% in chloroform-d ("100%", 99.96 atom % D)
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 0.1% in chloroform-d (99.8 atom % D), TMS 0.01 %, NMR tube size 5 mm × 8 in. , ultra-thin wall
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 1% in chloroform-d (99.8 atom % D)
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 5% in chloroform-d (99.8 atom % D), TMS 2 %, NMR tube size 5 mm × 8 in.
Supelco
Ethylbenzene solution, suitable for NMR (reference standard), 0.1% in chloroform-d (99.8 atom % D), chromium(III) acetylacetonate 0.1 mg/mL, TMS 0.01 %, NMR tube size 5 mm × 8 in.
Sigma-Aldrich
Ethylbenzene solution, suitable for NMR (reference standard), 10% in chloroform-d (99.8 atom % D), NMR tube size 10 mm × 8 in.