Saltar al contenido
Merck

[NiFe]-hydrogenase maturation in vitro: analysis of the roles of the HybG and HypD accessory proteins1.

The Biochemical journal (2014-09-04)
Basem Soboh, Ute Lindenstrauss, Claudia Granich, Mahwish Javed, Martin Herzberg, Claudia Thomas, Sven T Stripp
RESUMEN

[NiFe]-hydrogenases (Hyd) bind a nickel-iron-based cofactor. The Fe ion of the cofactor is bound by two cyanide ligands and a single carbon monoxide ligand. Minimally six accessory proteins (HypA-HypF) are necessary for NiFe(CN)2CO cofactor biosynthesis in Escherichia coli. It has been shown that the anaerobically purified HypC-HypD-HypE scaffold complex carries the Fe(CN)2CO moiety of this cofactor. In the present study, we have purified the HybG-HypDE complex and used it to successfully reconstitute in vitro active Hyd from E. coli. HybG is a homologue of HypC that is specifically required for the maturation of Hyd-2 and also functions in the maturation of Hyd-1 of E. coli. Maturation of active Hyd-1 and Hyd-2 could be demonstrated in extracts derived from HybG- and HypD-deficient E. coli strains by adding anaerobically purified HybG-HypDE complex. In vitro maturation was dependent on ATP, carbamoylphosphate, nickel and reducing conditions. Hydrogenase maturation was prevented when the purified HybG-HypDE complex used in the maturation assay lacked a bound Fe(CN)2CO moiety. These findings demonstrate that it is possible to isolate incompletely processed intermediates on the maturation pathway and to use these to activate apo-forms of [NiFe]-hydrogenase large subunits.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 2800, slurry, in H2O, active catalyst
Sigma-Aldrich
Nickel, powder, <50 μm, 99.7% trace metals basis
Sigma-Aldrich
Nickel, nanopowder, <100 nm avg. part. size, ≥99% trace metals basis
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 2400, slurry, in H2O, active catalyst
Sigma-Aldrich
Nickel, powder, <150 μm, 99.99% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.125 mm, ≥99.9%
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 4200, slurry, in H2O, active catalyst
Nickel, rod, 100mm, diameter 1.5mm, 99.99+%
Sigma-Aldrich
Nickel, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Nickel, powder, <1 μm, 99.8% trace metals basis
Sigma-Aldrich
Nickel, wire, diam. 0.25 mm, ≥99.9%
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 3202, slurry, in H2O, active catalyst
Sigma-Aldrich
Nickel, rod, diam. 6.35 mm, ≥99.99% trace metals basis
Nickel, pellets, 100g, max. size 10mm, 99.999%
Sigma-Aldrich
Nickel, wire, diam. 0.5 mm, ≥99.9% trace metals basis
Nickel, mesh, 30x30mm, nominal aperture 0.34mm, thickness 0.025mm, wire diameter 0.041mm, 70 wires/inch, open area 80%, electro-formed mesh, 99.9%
Sigma-Aldrich
Nickel, wire, diam. 0.5 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.1 mm, 99.98% trace metals basis
Sigma-Aldrich
Nickel, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.95% trace metals basis
Nickel, foil, 100x100mm, thickness 1.6mm, 99%
Sigma-Aldrich
Nickel, foil, thickness 0.25 mm, 99.995% trace metals basis
Nickel, foil, light tested, 150x150mm, thickness 0.025mm, 99.9%
Nickel, mesh, 100x250mm, nominal aperture 0.73mm, wire diameter 0.25mm, 26x26 wires/inch, open area 55%, plain weave mesh, 99%
Nickel, pellets, 100g, max. size 5mm, 99.99+%
Nickel, wire reel, 100m, diameter 0.025mm, as drawn, 99.98%
Nickel, mesh, 65x65mm, nominal aperture 0.34mm, thickness 0.025mm, wire diameter 0.041mm, 70 wires/inch, open area 80%, electro-formed mesh, 99.9%
Nickel, foil, 100x100mm, thickness 0.1mm, annealed, 99%
Nickel, mesh, 130x130mm, nominal aperture 0.04mm, thickness 0.004mm, wire diameter 0.011mm, 500 wires/inch, open area 60%, electro-formed mesh, 99.9%
Nickel, sphere, 100pcs, diameter 1.0mm, precision sphere grade 200, 99%
Nickel, pellets, 20g, max. size 5mm, 99.99+%