Saltar al contenido
Merck

Florfenicol residues in rainbow trout after oral dosing in recirculating and flow-through culture systems.

Journal of aquatic animal health (2014-10-17)
J R Meinertz, K R Hess, J A Bernardy, M P Gaikowski, M Whitsel, R G Endris
RESUMEN

Aquaflor is a feed premix for fish containing the broad spectrum antibacterial agent florfenicol (FFC) incorporated at a ratio of 50% (w/w). To enhance the effectiveness of FFC for salmonids infected with certain isolates of Flavobacterium psychrophilum causing cold water disease, the FFC dose must be increased from the standard 10 mg·kg⁻¹ body weight (BW)·d⁻¹ for 10 consecutive days. A residue depletion study was conducted to determine whether FFC residues remaining in the fillet tissue after treating fish at an increased dose would be safe for human consumption. Groups of Rainbow Trout Oncorhynchus mykiss (total n = 144; weight range, 126-617 g) were treated with FFC at 20 mg·kg⁻¹ BW·d⁻¹ for 10 d in a flow-through system (FTS) and a recirculating aquaculture system (RAS) each with a water temperature of ∼13°C. The two-tank RAS included a nontreated tank containing 77 fish. Fish were taken from each tank (treated tank, n = 16; nontreated tank, n = 8) at 6, 12, 24, 48, 72, 120, 240, 360, and 480 h posttreatment. Florfenicol amine (FFA) concentrations (the FFC marker residue) in skin-on fillets from treated fish were greatest at 12 h posttreatment (11.58 μg/g) in the RAS and were greatest at 6 h posttreatment (11.09 μg/g) in the FTS. The half-lives for FFA in skin-on fillets from the RAS and FTS were 20.3 and 19.7 h, respectively. Assimilation of FFC residues in the fillets of nontreated fish sharing the RAS with FFC-treated fish was minimal. Florfenicol water concentrations peaked in the RAS-treated tank and nontreated tanks at 10 h (453 μg/L) and 11 h (442 μg/L) posttreatment, respectively. Monitoring of nitrite concentrations throughout the study indicated the nitrogen oxidation efficiency of the RAS biofilter was minimally impacted by the FFC treatment.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Agua, suitable for HPLC
Sigma-Aldrich
Agua, Nuclease-Free Water, for Molecular Biology
Sigma-Aldrich
Agua, sterile-filtered, BioReagent, suitable for cell culture
Sigma-Aldrich
Agua, Deionized
Supelco
Agua, suitable for ion chromatography
Sigma-Aldrich
Agua, for embryo transfer, sterile-filtered, BioXtra, suitable for mouse embryo cell culture
Sigma-Aldrich
Agua, Molecular Biology, sterile filtered
Supelco
Agua, for TOC analysis
Sigma-Aldrich
Agua, BioPerformance Certified
Agua, UKAS ISO/IEC17025 and ISO Guide 34 certified, density: 0.9982 g/mL at 20 °C, density: 0.9970 g/mL at 25 °C
Sigma-Aldrich
Agua, ACS reagent
Supelco
Agua, ACS reagent, for ultratrace analysis
Sigma-Aldrich
Agua, for cell biology, sterile ultrafiltered
Sigma-Aldrich
Thiamphenicol
Sigma-Aldrich
Agua, PCR Reagent
Supelco
Florfenicol, analytical standard, for drug analysis
Sigma-Aldrich
Agua, tested according to Ph. Eur.
Supelco
Agua, suitable for HPCE, suitable for luminescence, suitable for UV/Vis spectroscopy
Supelco
Florfenicol amine, VETRANAL®, analytical standard
Sigma-Aldrich
Agua, endotoxin, free
Supelco
Thiamphenicol, analytical standard
Agua, UKAS ISO/IEC17025 and ISO Guide 34 certified, density: 0.9982 g/mL at 20 °C, density: 0.9970 g/mL at 25 °C
Supelco
Agua, H&D Fitzgerald Ltd. Quality
Thiamphenicol, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Water-16O, ≥99.94 atom % 16O