Saltar al contenido
Merck

Application of the Fenton process in the elimination of helminth eggs.

Journal of water and health (2014-12-05)
Sandra Isabel Escobar-Megchún, Hugo Alejandro Nájera-Aguilar, Magaly González-Hilerio, Javier Gutiérrez-Jiménez, Rubén Fernando Gutiérrez-Hernández, María Neftalí Rojas-Valencia
RESUMEN

This study relates to a method for evaluating the degradation efficiency of Ascaris lumbricoides eggs through a Fenton reaction, using hydrogen peroxide (H2O2) at 100, 250, and 500 mg/L, ferrous sulfate (FeSO4) at 458 mg/L Fe(2+) and pH values of 3, 4.5, and 6. The experiments were conducted according to a 3(2) experimental design, with 1:1, 3:1, and 5:1 (H2O2/Fe(2+)) molar ratios. The oxidation and flocculation stages were performed at 130 rpm during 2 hours and at 25-30 rpm during 20 min, respectively. As a result of the Fenton reaction, an average of 91.2% Ascaris lumbricoides egg degradation was achieved at pH 6 using a 500 mg/L dose of H2O2 and a 3:1 (H2O2/Fe(2+)) molar ratio. Thus, this process is an alternative for eliminating parasites that are resistant to conventional disinfection processes and significantly reduces the human health hazard they represent.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Peróxido de hidrógeno solution, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Iron(II) sulfate heptahydrate, ReagentPlus®, ≥99%
Sigma-Aldrich
Iron(II) sulfate heptahydrate, ACS reagent, ≥99.0%
Sigma-Aldrich
Peróxido de hidrógeno solution, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Iron, ≥99%, reduced, powder (fine)
Millipore
Peróxido de hidrógeno solution, 3%, suitable for microbiology
Supelco
Peróxido de hidrógeno solution, ≥30%, for trace analysis
Sigma-Aldrich
Iron(II) sulfate heptahydrate, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Sigma-Aldrich
Iron, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Sigma-Aldrich
Peróxido de hidrógeno solution, 34.5-36.5%
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Supelco
Peróxido de hidrógeno solution, 30 % (w/w), for ultratrace analysis
Sigma-Aldrich
Iron(II) sulfate heptahydrate, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Peróxido de hidrógeno solution, tested according to Ph. Eur.
Sigma-Aldrich
Iron, foil, thickness 0.25 mm, ≥99.99% trace metals basis
Iron, foil, 100x100mm, thickness 0.25mm, hard, 99.5%
Iron, foil, 100x100mm, thickness 0.1mm, hard, 99.5%
Iron, IRMM®, certified reference material, 0.5 mm wire
Iron, foil, 300x300mm, thickness 0.1mm, hard, 99.5%
Iron, rod, 100mm, diameter 2.0mm, as drawn, 99.95%
Iron, rod, 50mm, diameter 40mm, as drawn, armcO« soft ingot 99.8%
Iron, rod, 200mm, diameter 25mm, as drawn, 98+%
Iron, rod, 200mm, diameter 6.35mm, as drawn, soft ingot 99.8%