Saltar al contenido
Merck
  • Determination of N-nitrosodiethanolamine, NDELA in cosmetic ingredients and products by mixed mode solid phase extraction and UPLC-tandem mass spectrometry with porous graphitic carbon column through systemic sample pre-cleanup procedure.

Determination of N-nitrosodiethanolamine, NDELA in cosmetic ingredients and products by mixed mode solid phase extraction and UPLC-tandem mass spectrometry with porous graphitic carbon column through systemic sample pre-cleanup procedure.

Talanta (2015-03-17)
Kyung-Mi Joo, Mi-Sook Shin, Ji-hee Jung, Boo-Min Kim, John-Whan Lee, Hye-Jin Jeong, Kyung-Min Lim
RESUMEN

A rapid, sensitive, accurate and specific ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS) method for the detection of N-nitrosodiethanolamine (NDELA), a highly toxic contaminant in cosmetic raw materials and products was developed and validated. Systematized sample preparation steps were developed according to product types. Various SPE cartridges and columns were examined to establish the condition of SPE and chromatographic separation for NDELA. Sample cleanup steps consisting of solvent and liquid-liquid extraction tailored to the various sample matrix types were established prior to mixed mode SPE (Bond Elut AccuCAT). Chromatographic separation was achieved within 7 min on a porous graphitic carbon (PGC) column using a gradient elution with the mobile phase of 1mM ammonium acetate containing 0.1% acetic acid and methanol. NDELA was monitored using an electrospray positive ionization mass spectrometry in the multiple reaction monitoring (MRM) mode (m/z 134.9>103.7(quantifier) and 73.7(qualifier ion)) with d8-NDELA (m/z 143.1>111.0) as internal standard. The standard curves were linear over the concentration range of 1-100 ng/mL with a correlation coefficient higher than 0.99. The limit of detection (LOD) and the limit of quantification (LOQ) was 10 and 20 μg/kg, respectively (0.5 and 1 ng/mL in standard solution). The intra- and inter-day precisions were estimated to be below 11.1% and accuracies were within the range of 90.8-115.8%. The validated method was successfully applied to the analysis of real samples including raw materials, skin care, make-up, shampoos and hair products.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Alcohol etílico puro 200, Molecular Biology
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Alcohol etílico puro, 200 proof, ACS reagent, ≥99.5%
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Diclorometano, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Diclorometano, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Alcohol etílico puro, 200 proof, meets USP testing specifications
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ammonium acetate, ACS reagent, ≥97%
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Alcohol etílico puro 190, for molecular biology
Sigma-Aldrich
Ammonium acetate, ≥99.99% trace metals basis
Supelco
Ammonium acetate, LiChropur, eluent additive for LC-MS
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Diclorometano, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Metanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Ammonium acetate, Molecular Biology, ≥98%
Sigma-Aldrich
Etanol, BioUltra, Molecular Biology, ≥99.8%, (absolute alcohol, without additive, A15 o1)
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%