Saltar al contenido
Merck
  • Synthesis of g-C3N4/Fe3O4 nanocomposites and application as a new sorbent for solid phase extraction of polycyclic aromatic hydrocarbons in water samples.

Synthesis of g-C3N4/Fe3O4 nanocomposites and application as a new sorbent for solid phase extraction of polycyclic aromatic hydrocarbons in water samples.

Talanta (2014-12-06)
Man Wang, Shihai Cui, Xiaodi Yang, Wentao Bi
RESUMEN

An easy preparation of g-C3N4/Fe3O4 nanocomposites by chemical co-precipitation has been demonstrated. The as-prepared materials were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The high affinity of g-C3N4 toward polycyclic aromatic hydrocarbons and the magnetic behavior of Fe3O4 were combined to provide an efficient and simple magnetic solid phase extraction (MSPE). The adsorption and desorption of polycyclic aromatic hydrocarbons on g-C3N4/Fe3O4 were examined. Different factors affecting the magnetic solid phase extraction of polycyclic aromatic hydrocarbons were assessed in terms of adsorption, desorption, and recovery. Under the optimized conditions, the proposed method showed good limits of detection (LOD, S/N=3) in the range of 0.05-0.1 ng mL(-1) and precision in the range of 1.8-5.3% (RSDs, n=3). This method was also successfully applied to the analysis of real water samples; good spiked recoveries over the range of 80.0-99.8% were obtained.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Cloruro de hierro (III) hexahydrate, ACS reagent, 97%
Sigma-Aldrich
Iron(II) chloride tetrahydrate, puriss. p.a., ≥99.0% (RT)
Sigma-Aldrich
Cloruro de hierro (III) hexahydrate, reagent grade, ≥98%, chunks
Sigma-Aldrich
Iron(II) chloride tetrahydrate, ReagentPlus®, 98%
Sigma-Aldrich
Melamine, 99%
Sigma-Aldrich
Cloruro de hierro (III) hexahydrate, puriss. p.a., ACS reagent, crystallized, 98.0-102% (RT)
Sigma-Aldrich
Naphthalene, 99%
Sigma-Aldrich
Pyrene, 98%
Sigma-Aldrich
Anthracene, ReagentPlus®, 99%
Sigma-Aldrich
Phenanthrene, 98%
Sigma-Aldrich
Iron(II) chloride tetrahydrate, 99.99% trace metals basis
Sigma-Aldrich
Anthracene, reagent grade, 97%
Supelco
Naphthalene, analytical standard
Supelco
Melamine, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Naphthalene, suitable for scintillation, ≥99%
Sigma-Aldrich
Pyrene, puriss. p.a., suitable for fluorescence, ≥99.0% (GC)
Supelco
Melting point standard 79.5-81°C, analytical standard
Supelco
Pyrene, analytical standard
Sigma-Aldrich
Benzo[a]anthracene, 99%
Supelco
Anthracene, analytical standard
Sigma-Aldrich
Fluoranthene, 98%
Supelco
Naphthalene, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Melamine, analytical standard
Sigma-Aldrich
Acenaphthylene, 99%
Supelco
Fluoranthene, analytical standard
Supelco
Benzo[a]anthracene, analytical standard
USP
Melamine, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Phenanthrene, sublimed grade, ≥99.5%
Supelco
Phenanthrene, analytical standard, for environmental analysis
Sigma-Aldrich
Anthracene, suitable for scintillation, ≥99.0% (GC)