Skip to Content
Merck
  • [NiFe]-hydrogenase maturation in vitro: analysis of the roles of the HybG and HypD accessory proteins1.

[NiFe]-hydrogenase maturation in vitro: analysis of the roles of the HybG and HypD accessory proteins1.

The Biochemical journal (2014-09-04)
Basem Soboh, Ute Lindenstrauss, Claudia Granich, Mahwish Javed, Martin Herzberg, Claudia Thomas, Sven T Stripp
ABSTRACT

[NiFe]-hydrogenases (Hyd) bind a nickel-iron-based cofactor. The Fe ion of the cofactor is bound by two cyanide ligands and a single carbon monoxide ligand. Minimally six accessory proteins (HypA-HypF) are necessary for NiFe(CN)2CO cofactor biosynthesis in Escherichia coli. It has been shown that the anaerobically purified HypC-HypD-HypE scaffold complex carries the Fe(CN)2CO moiety of this cofactor. In the present study, we have purified the HybG-HypDE complex and used it to successfully reconstitute in vitro active Hyd from E. coli. HybG is a homologue of HypC that is specifically required for the maturation of Hyd-2 and also functions in the maturation of Hyd-1 of E. coli. Maturation of active Hyd-1 and Hyd-2 could be demonstrated in extracts derived from HybG- and HypD-deficient E. coli strains by adding anaerobically purified HybG-HypDE complex. In vitro maturation was dependent on ATP, carbamoylphosphate, nickel and reducing conditions. Hydrogenase maturation was prevented when the purified HybG-HypDE complex used in the maturation assay lacked a bound Fe(CN)2CO moiety. These findings demonstrate that it is possible to isolate incompletely processed intermediates on the maturation pathway and to use these to activate apo-forms of [NiFe]-hydrogenase large subunits.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 2400, slurry, in H2O, active catalyst
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 4200, slurry, in H2O, active catalyst
Sigma-Aldrich
Activated Nickel Catalyst
Sigma-Aldrich
Nickel, foil, thickness 0.125 mm, ≥99.9%
Sigma-Aldrich
Nickel, wire, diam. 0.5 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Nickel, powder, <150 μm, 99.99% trace metals basis
Sigma-Aldrich
Nickel, powder, <1 μm, 99.8% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.25 mm, 99.995% trace metals basis
Sigma-Aldrich
Nickel, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.95% trace metals basis
Nickel, broken cathode squares, 500g, max. size 50mm, 99.8%
Sigma-Aldrich
Nickel, wire, diam. 0.25 mm, ≥99.9%
Nickel, wire reel, 50m, diameter 1.0mm, as drawn, 99%
Nickel, rod, 100mm, diameter 2.0mm, annealed, 99%
Nickel, pellets, 100g, max. size 10mm, 99.99+%
Nickel, rod, 100mm, diameter 40mm, 99%
Nickel, rod, 500mm, diameter 12.7mm, 99.98%
Nickel, wire reel, 5m, diameter 0.5mm, as drawn, 99.99+%
Nickel, wire reel, 1m, diameter 2.0mm, hard, 99.98%
Nickel, foil, light tested, 100x100mm, thickness 0.015mm, 99.9%
Nickel, wire reel, 200m, diameter 0.125mm, annealed, 99.98%
Nickel, foil, light tested, 25x25mm, thickness 0.015mm, 99.9%
Nickel, foil, 25mm disks, thickness 0.05mm, as rolled, 99.98%
Nickel, rod, 200mm, diameter 3.0mm, 99%
Nickel, tube, 1000mm, outside diameter 2.4mm, inside diameter 2.248mm, wall thickness 0.076mm, hard, 99.5%
Nickel, foil, 15mm disks, thickness 0.125mm, annealed, 99%
Nickel, foil, 4mm disks, thickness 0.5mm, as rolled, 100%
Nickel, tube, 100mm, outside diameter 1.8mm, inside diameter 1.6mm, wall thickness 0.1mm, hard, 99.5%
Nickel, foil, 15mm disks, thickness 0.075mm, as rolled, 99.98%
Nickel, rod, 500mm, diameter 3.0mm, 99%
Nickel, tube, 200mm, outside diameter 0.35mm, inside diameter 0.3mm, wall thickness 0.025mm, hard, 99.5%