Skip to Content
Merck
  • Xanthine derivatives quantification in serum by capillary zone electrophoresis.

Xanthine derivatives quantification in serum by capillary zone electrophoresis.

Journal of chromatographic science (2013-11-14)
Juan Peris-Vicente, Maria Rambla-Alegre, Abhilasha Durgavanshi, Devasish Bose, Josep Esteve-Romero, Sergio Marco-Peiró
ABSTRACT

A capillary electrophoresis method was developed to quantify caffeine and theophylline, xanthine derivatives with bronchodilator activity. Buffer concentration, pH and applied voltage were optimized using a central composite design-face centred. Separation conditions were: silica capillary tube, 75 μm (i.d.) and 61 cm (total length); absorbance detection, 280 nm; borate buffer, 20 mM, pH 9.0; applied voltage, 25 kV and 1 psi injection/8 s. Validation was performed in blank serum following the International Conference Harmonization guidelines: resolution (peaks without overlapping), linear range (0.125-50 µg/mL; r(2) > 0.9999), limits of detection and quantification (10; 20 and 33; 66 ppb for caffeine and theophylline, respectively), intra- and inter-day precision (Relative standard deviation lower than 1.9%) and accuracy (98-101%). Migration times were <8 min. This method is simple, specific and suitable and reaches high label claims (98.7-100.4%) in pharmaceutical formulations analysis. Moreover, the method was applied to the monitoring of the analytes in serum of patients.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Caffeine, anhydrous, 99%, FCC, FG
Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Supelco
Caffeine Melting Point Standard, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Caffeine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
Benalaxyl-M, PESTANAL®, analytical standard
USP
Caffeine melting point standard, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Caffeine, anhydrous, tested according to Ph. Eur.
Sigma-Aldrich
ACES, BioUltra, ≥99.5% (T)
Supelco
Mettler-Toledo Calibration substance ME 18872, Caffeine, traceable to primary standards (LGC)
Sigma-Aldrich
Caffeine, powder, ReagentPlus®
Sigma-Aldrich
ACES, ≥99.0% (titration)
Sigma-Aldrich
ACES, BioXtra, ≥99.0% (titration)
Sigma-Aldrich
Caffeine, meets USP testing specifications, anhydrous
Sigma-Aldrich
Caffeine, BioXtra
Sigma-Aldrich
Caffeine, Sigma Reference Standard, vial of 250 mg
Millipore
Bifido Selective Supplement B, suitable for microbiology
Supelco
Caffeine, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
ACES, BioPerformance Certified, ≥99.0%, suitable for cell culture
Sigma-Aldrich
Boric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., buffer substance, ≥99.8%
USP
Glacial acetic acid, United States Pharmacopeia (USP) Reference Standard
Caffeine, European Pharmacopoeia (EP) Reference Standard
USP
Caffeine, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Sodium acetate, meets USP testing specifications, anhydrous
Sigma-Aldrich
Sodium acetate, anhydrous, Molecular Biology, ≥99%
Sigma-Aldrich
Sodium acetate, BioXtra, ≥99.0%
Supelco
Sodium hydroxide concentrate, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Acetic acid-12C2, 99.9 atom % 12C
Caffeine for system suitability, European Pharmacopoeia (EP) Reference Standard
Supelco
Acetic acid, analytical standard
Sigma-Aldrich
Sodium acetate, anhydrous, BioUltra, suitable for luminescence, Molecular Biology, ≥99.0% (NT)