Skip to Content
Merck

The fate of ritonavir in the presence of darunavir.

International journal of pharmaceutics (2014-09-03)
D N Nguyen, G Van den Mooter
ABSTRACT

This study was the first investigation into the potential of a fixed dose combination of ritonavir and darunavir in the form of dispersible powders prepared by spray drying. A common polymer (hydroxypropyl methylcellulose, polyvinylpyrrolidone, and polyvinylpyrrolidone-vinyl acetate 64) was formulated with either ritonavir or darunavir or a combination of ritonavir and darunavir. The influence of these polymers on the supersaturation level of ritonavir and darunavir was investigated. The concentration levels of ritonavir and darunavir during these tests dropped instantly to a plateau which could be considered as amorphous solubility. Besides, the presence of darunavir always decreased the supersaturation level of ritonavir and vice versa no matter which polymers were used. Moreover, the rate and extent of release of both ritonavir and darunavir from ternary spray-dried powders were less than the releases from binary spray-dried powders. Intermolecular interaction between ritonavir and darunavir was ruled out by (1)H NMR study which means that the decrease in supersaturation level or release must be at least partially attributed to the mediated solvent process. In order to restrict the mutual influence between darunavir and ritonavir, a complex of both ritonavir and darunavir with (2-hydroxypropyl)-β-cyclodextrin was prepared and improved the dissolution rate of both ritonavir and darunavir.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium phosphate monobasic, BioXtra, ≥99.0%
Sigma-Aldrich
Sodium phosphate monobasic solution, BioUltra, 5 M in H2O
Sigma-Aldrich
Ethanol, absolute, sales not in Germany, ≥99.8% (vol.)
Supelco
Vinyl acetate, analytical standard
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
Sigma-Aldrich
Vinyl acetate, contains 3-20 ppm hydroquinone as inhibitor, ≥99%
Sigma-Aldrich
8-Octanoyloxypyrene-1,3,6-trisulfonic acid trisodium salt, suitable for fluorescence, ≥90% (HPCE)
Sigma-Aldrich
Sodium phosphate monobasic, purum p.a., anhydrous, ≥99.0% (T)
Supelco
Dimethyl sulfoxide, analytical standard
Supelco
Dichloromethane, Selectophore, ≥99.5%
Sigma-Aldrich
Dimethyl sulfoxide, BioUltra, Molecular Biology, ≥99.5% (GC)
Supelco
Acetonitrile, analytical standard
Sigma-Aldrich
Dimethyl sulfoxide, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Supelco
Dichloromethane, analytical standard
Sigma-Aldrich
Sodium phosphate monobasic, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Sodium phosphate monobasic, meets USP testing specifications, anhydrous
Sigma-Aldrich
Sodium phosphate monobasic, BioReagent, Molecular Biology, anhydrous, ≥98%
Sigma-Aldrich
Dimethyl sulfoxide, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
Dimethyl sulfoxide, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Sodium phosphate monobasic, BioPerformance Certified, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99.0% (titration)
Sigma-Aldrich
Dimethyl sulfoxide, meets EP testing specifications, meets USP testing specifications
Sigma-Aldrich
Dimethyl sulfoxide, Molecular Biology
Sigma-Aldrich
Dimethyl sulfoxide, PCR Reagent
Sigma-Aldrich
Acetonitrile, electronic grade, 99.999% trace metals basis
Vinyl acetate, European Pharmacopoeia (EP) Reference Standard
USP
Dimethyl sulfoxide, United States Pharmacopeia (USP) Reference Standard
Supelco
Methylene Chloride, Pharmaceutical Secondary Standard; Certified Reference Material
USP
Methyl alcohol, United States Pharmacopeia (USP) Reference Standard
Dimethyl sulfoxide, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Ultrapure Acetonitrile