SHGEA47HH3

Millipore Express^® SHC 0.5/0.2µm, OptiScale^® 47mm Capsule

Fittings 1/4 in. HB/HB, Autoclavable

• Synonym(s): Optiscale 47mm Millipore Express SHC 0.5/0.2 μm 1/4 in. HB/HB
• UNSPSC Code: 23151806
• eCl@ss: 32031690

Properties

• Product Name: Millipore Express^® SHC, OptiScale^® Capsule, filtration area 17.7 cm², OptiScale^®, pore size 0.5/0.2 μm
• material: PVDF vent cap; fluoroelastomer FKM seal; fluoroelastomer O-ring; polyethersulfone membrane; polypropylene housing; polypropylene support
• Quality Level: 400
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterility: non-sterile
• Sterilization Compatibility: autoclavable compatible
• product line: OptiScale^®
• feature: hydrophilic
• manufacturer/tradename: Millipore Express^®
• parameter: 5.1 bar max. differential pressure (80 psi) at 25 °C (Forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C; 690 mbar max. differential pressure (10 psi) at 25 °C (Reverse)
• technique(s): sterile filtration: suitable
• L: 3.70 in. (94 mm)
• W: 2.75 in.
• cartridge nominal length: 3.70 in. (94 mm)
• diam.: 2.75 in. (70 mm)
• filtration area: 17.7 cm²
• inlet connection diam.: 1/4 in.
• outlet connection diam.: 1/4 in.
• impurities: <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• matrix: Millipore Express^® SHC
• pore size: 0.5/0.2 μm pore size
• bubble point: ≥4000 mbar (58 psig), air with water at 23 °C
• fitting: 6 mm (1/4 in.) inlet hose barb; 6 mm (1/4 in.) outlet hose barb

Description

General description

Device Configuration: Capsule

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Other Notes

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany