Skip to Content
Merck
  • Ultra high performance supercritical fluid chromatography coupled with tandem mass spectrometry for screening of doping agents. II: Analysis of biological samples.

Ultra high performance supercritical fluid chromatography coupled with tandem mass spectrometry for screening of doping agents. II: Analysis of biological samples.

Analytica chimica acta (2014-12-04)
Lucie Nováková, Marco Rentsch, Alexandre Grand-Guillaume Perrenoud, Raul Nicoli, Martial Saugy, Jean-Luc Veuthey, Davy Guillarme
ABSTRACT

The potential and applicability of UHPSFC-MS/MS for anti-doping screening in urine samples were tested for the first time. For this purpose, a group of 110 doping agents with diverse physicochemical properties was analyzed using two separation techniques, namely UHPLC-MS/MS and UHPSFC-MS/MS in both ESI+ and ESI- modes. The two approaches were compared in terms of selectivity, sensitivity, linearity and matrix effects. As expected, very diverse retentions and selectivities were obtained in UHPLC and UHPSFC, proving a good complementarity of these analytical strategies. In both conditions, acceptable peak shapes and MS detection capabilities were obtained within 7 min analysis time, enabling the application of these two methods for screening purposes. Method sensitivity was found comparable for 46% of tested compounds, while higher sensitivity was observed for 21% of tested compounds in UHPLC-MS/MS and for 32% in UHPSFC-MS/MS. The latter demonstrated a lower susceptibility to matrix effects, which were mostly observed as signal suppression. In the case of UHPLC-MS/MS, more serious matrix effects were observed, leading typically to signal enhancement and the matrix effect was also concentration dependent, i.e., more significant matrix effects occurred at the lowest concentrations.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Ammonium formate, ≥99.995% trace metals basis
Pricing and availability is not currently available.
Supelco
Tetrahydrofuran, analytical standard
Pricing and availability is not currently available.
Supelco
Tetrahydrofuran, Selectophore, ≥99.5%
Pricing and availability is not currently available.
Supelco
Ammonium formate, eluent additive for LC-MS, LiChropur, ≥99.0%
Pricing and availability is not currently available.
Sigma-Aldrich
Argon, ≥99.998%
Pricing and availability is not currently available.
Sigma-Aldrich
Ammonium formate, BioUltra, ≥99.0% (calc. based on dry substance, NT)
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, anhydrous, contains 250 ppm BHT as inhibitor, ≥99.9%
Pricing and availability is not currently available.
Sigma-Aldrich
Acetazolamide, ≥99%, powder
Pricing and availability is not currently available.
Acetazolamide, European Pharmacopoeia (EP) Reference Standard
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, anhydrous, ≥99.9%, inhibitor-free
Pricing and availability is not currently available.
Supelco
Tetrahydrofuran, HPLC grade, ≥99.9%, inhibitor-free
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, inhibitor-free, suitable for HPLC, ≥99.9%
Pricing and availability is not currently available.
USP
Acetazolamide, United States Pharmacopeia (USP) Reference Standard
Pricing and availability is not currently available.
Clopamide for system suitability, European Pharmacopoeia (EP) Reference Standard
Pricing and availability is not currently available.
Acetazolamide for system suitability, European Pharmacopoeia (EP) Reference Standard
Pricing and availability is not currently available.
Supelco
Tetrahydrofuran, Pharmaceutical Secondary Standard; Certified Reference Material
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, contains 200-400 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, ACS reagent, ≥99.0%, contains 200-400 ppm BHT as inhibitor
Pricing and availability is not currently available.
Sigma-Aldrich
Ammonium formate, reagent grade, 97%
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, ≥99.0%, contains 200-400 ppm BHT as inhibitor, ReagentPlus®
Pricing and availability is not currently available.
Sigma-Aldrich
Tetrahydrofuran, contains 250 ppm BHT as inhibitor, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.9%
Pricing and availability is not currently available.
Etacrynic acid for system suitability, European Pharmacopoeia (EP) Reference Standard
Pricing and availability is not currently available.
Supelco
Furosemide, Pharmaceutical Secondary Standard; Certified Reference Material
Pricing and availability is not currently available.
Sigma-Aldrich
Metolazone, ≥98% (HPLC), solid
Pricing and availability is not currently available.
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Pricing and availability is not currently available.
Sigma-Aldrich
Argon-40Ar, 99.95 atom %
Pricing and availability is not currently available.
Supelco
Indapamide, analytical standard, for drug analysis
Pricing and availability is not currently available.
Sigma-Aldrich
Furosemide
Pricing and availability is not currently available.
Sigma-Aldrich
Bumetanide, ≥98%
Pricing and availability is not currently available.
USP
Indapamide, United States Pharmacopeia (USP) Reference Standard
Pricing and availability is not currently available.