Saltar al contenido
Merck

1.14416

Sulfide Test Kit, colorimetric

0.02-0.25 mg/L (S²⁻), MQuant®

Sinónimos:

Sulfide Visual Test Kit

Iniciar sesión para ver los posibles precios especiales de su organización

Seleccione un Tamaño

En este momento no podemos mostrarle ni los precios ni la disponibilidad

Acerca de este artículo

UNSPSC Code:
41116116
NACRES:
NA.24

Saltar a

Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarle

Nombre del producto

Sulfide Test, colorimetric, 0.02-0.25 mg/L (S2-), for use with MCOLORTEST®

specific analyte(s)

sulfide

Quality Level

measuring range

0.02-0.25 mg/L (S2-)

compatibility

for use with MCOLORTEST®

detection method

colorimetric

storage temp.

15-25°C

Comparar elementos similares

Ver comparación completa

Mostrar Diferencias

1 of 4

Este artículo
1.147791.147771.11148
detection method

colorimetric

detection method

photometric (Dimethyl-p-phenylenediamine)

detection method

colorimetric

detection method

titrimetric

specific analyte(s)

sulfide

specific analyte(s)

sulfide

specific analyte(s)

sulfide

specific analyte(s)

sulfite

measuring range

0.02-0.25 mg/L (S2-)

measuring range

0.020-1.50 mg/L (S2-)

measuring range

0.1-5 mg/L (S2-)

measuring range

-

microbialanalysis
microbialanalysis

-

microbialanalysis
microbialanalysis

microbialanalysis
microbialanalysis

compatibility

for use with MCOLORTEST®

compatibility

for use with Spectroquant® Move 100, for use with Spectroquant® Nova 60 A, for use with Spectroquant® Prove 100, for use with Spectroquant® Prove 300, for use with Spectroquant® Prove 600

compatibility

for use with MCOLORTEST®

compatibility

for use with MQUANT®

storage temp.

15-25°C

storage temp.

15-25°C

storage temp.

15-25°C

storage temp.

15-25°C

General description

Method: colorimetric with color card and comparator block with long test tubes 0.02-0.04-0.06-0.08-0.10-0.13-0.16-0.20-0.25 mg/l S MQuant®
The MQuant® Sulfide test (formally MColortest®) can be used for the determination of sulfide in e.g.
  • Groundwater and surface water
  • Drinking water and mineral water
  • Waters from aquaculture
  • Wastewater
  • Soils after appropriate sample pretreatment
This test is not suited for seawater.

Method
In aqueous solutions of sulfides a pH-dependent equilibrium exists between dissolved hydrogen sulfide (H2S), hydrogen sulfide ions (HS-), and sulfide ions (S2-). In the acidic range, in which practically only dissolved hydrogen sulfide is present, this reacts with dimethyl-p-phenylenediamine and iron(III) ions to form methylene blue. The sulfide concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color fields of a color card. The unique brilliance of the print and their fine color graduation allow precise analyses, even at the lower end of the concentration range.
Due to the long test tubes a sensitive measurement range can be covered.
Using the refill pack 1.18468 containing all the reagents, the original test kit can be used for a very long time, making it a particularly economical and ecological system.

Legal Information

MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany

pictograms

Corrosion

signalword

Danger

Hazard Classifications

Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A

Clase de almacenamiento

8B - Non-combustible, corrosive hazardous materials

wgk_germany

WGK 1

flash_point_f

Not applicable

flash_point_c

Not applicable


Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Questions

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico