Antifoam SE-15 is a 10% emulsion of active silicone polymer and non-ionic emulsifiers. It can be repeatedly sterilized by autoclaving. Antifoam C Emulsion is an aqueous emulsion containing 30% active silicone. Further details about the different properties can be found in the datasheet:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/316/313/a8582pis.pdf
Größe auswählen
€ 54,80
€ 200,00
Über diesen Artikel
Fortfahren mit
Qualitätsniveau
Form
emulsion (aqueous)
Konzentration
10% (active silicon)
Methode(n)
cell culture | hybridoma: suitable
Löslichkeit
H2O: soluble (effective hot or cold.)
Dichte
1.0 g/mL at 25 °C
Anwendung(en)
microbiology
Lagertemp.
room temp
Eignung
(Mammalian (suspension))
bacteria (fermentation)
1 of 4
Dieser Artikel | A6582 | A8311 | A5757 |
|---|---|---|---|
| suitability (Mammalian (suspension)), bacteria (fermentation) | suitability (Mammalian (suspension)), bacteria (fermentation) | suitability (Mammalian (suspension)), bacteria (fermentation) | suitability - |
| application(s) microbiology | application(s) microbiology | application(s) microbiology | application(s) - |
| form emulsion (aqueous) | form emulsion (aqueous) | form emulsion (aqueous) | form emulsion |
| technique(s) cell culture | hybridoma: suitable | technique(s) cell culture | hybridoma: suitable, microbiological culture: suitable | technique(s) - | technique(s) cell culture | hybridoma: suitable, microbiological culture: suitable |
| storage temp. room temp | storage temp. room temp | storage temp. room temp | storage temp. - |
| solubility H2O: soluble (effective hot or cold.) | solubility - | solubility - | solubility - |
Allgemeine Beschreibung
Anwendung
- in the preparation of ramified rolling circle amplification (RAM) amplification buffer.[1]
- to find its effects on cell viability, virus infectivity and PCR (polymerase chain reaction) performance.[2]
- as a constituent of phosphate-buffered saline (PBS) for the determination of total antioxidant status (TAOS) by 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) assay. [3]
- as a component of autoinduction expression culture. [4]
- as a component of cyclic adenosine monophosphate (cAMP) detection buffer. [5]
Leistungsmerkmale und Vorteile
- Controls foaming in microbial culture flasks or fermentations
- Non-toxic to the culture medium
- Can be pumped to fermenter on an as-needed basis
Angaben zur Herstellung
suspensions should be used immediately.
Sonstige Hinweise
Ähnliches Produkt
Signalwort
Warning
H-Sätze
Gefahreneinstufungen
Eye Irrit. 2 - STOT RE 2 Inhalation
Zielorgane
Lungs
WGK
WGK 1
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Verwandter Inhalt
-
細胞培養液に添加するためにアンチフォームSE-15の購入を検討しております。この商品は、オートクレーブ可能でしょうか、オートクレーブ可能の場合何回程度が限度でしょうか。 もし可能であれば、アンチフォーム C エマルジョンとの違いも教えていただけないでしょうか。 (アンチフォーム C エマルジョンもオートクレーブ可能でしょうか。) よろしくお願い申し上げます。
1 answer-
Helpful?
-
-
At what concentration is SE-15 (A8582) to be used in bacterial cell culture to control foam?
1 answer-
This Antifoam product is typically used at starting concentrations of 0.01 - 0.02%. Optimization may be required based on variable culture density, ingredients, and conditions. Please see the link below to review the product datasheet for additional information:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/133/175/a8582dat.pdfHelpful?
-
-
I was wondering if you had any information in regards to the stability of antifoam SE-15, A8582. In particular, do you have any data about the stability of this product at pH 8.0? When in a solution, do you have any data on the product stability?
1 answer-
This product is stable at room temperature. Antifoam SE-15 can be pre-diluted with 3-10 parts of cool water to aid in dispersion. Pre-diluted suspensions should be used immediately. The stability of this product is not tested at pH 8.0. If you are looking for antifoams that will be stable at pH 8.0, perhaps you may consider Antifoam A Concentrate (Product A5633 and A6582), They are stable at pH 5.0-9.0. Please see this link for any additional information on Product A8582: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/316/313/a8582pis.pdf
Helpful?
-
Active Filters
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung




