Setting up the MilliSentials™ Lab Labeling System

MilliSentials™ Lab Labeling System

The MilliSentials^™ Lab Labeling System has been designed as a complete solution for laboratory labeling. As part of that solution we’ve put together a how-to-setup video, troubleshooting section, and list of materials to support the system.

How to Setup the MilliSentials™ Lab Labeling System

The following video provides a complete step by step procedure to unbox, setup, and use the MilliSentials^™ Lab Labeling System. The video is composed of eight sections which can be directly accessed within the video by following the links included below.

Video TimeStamps

• (0:00): Section 1 - Introduction
• (0:21): Section 2 - Contents & Unpacking Your System
• (0:55): Section 3 - Device Requirements & Installation of Required Software
• (2:40): Section 4 - Installation of MilliSentials™ Lab Ribbon
• (5:13): Section 5 - Installation of MilliSentials™ Lab Adapatable Labels
• (6:10): Section 6 - Deciding Your Printer Connection & Set Up Preferences
• (8:32): Section 7 - Connecting Your Printer via USB Cable with a Windows Computer
• (10:59): Section 8 - Connecting Your Printer to the Network via WiFI
• (14:30): Section 9 - Using the MilliSentials™ Lab Labeling System Software
• (20:25): Section 10 - Using the MilliSentials™ Lab Labeling System to Print