Accéder au contenu
Merck

A novel approach for high sensitive determination of sulfur mustard by derivatization and isotope-dilution LC-MS/MS analysis.

Talanta (2014-12-06)
Bin Xu, Cheng Zong, Zhiyong Nie, Lei Guo, Jianwei Xie
RÉSUMÉ

A new isotope-dilution liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determination of sulfur mustard (SM) has been developed using a direct chemical derivatization method by nucleophile potassium thioacetate (PTA) in aqueous solution. The reaction conditions for derivatization, such as reaction temperature, time, solvent and concentration of PTA, were optimized for high performance. Reversed phase liquid chromatography was suitable for analysis of such a PTA derivatized SM in complex environmental samples. Compared with other conventional gas chromatography or gas chromatography-mass spectrometry methods for direct detection on SM, better sensitivity and selectivity were achieved by this direct derivatization and LC-MS/MS method, where SM can be detected as low as 0.05 ng/mL in acetonitrile. The linear range was from 0.1 to 1000 ng/mL. The relative standard deviation (RSD) of the intra-day precision was less than 11.8%, and RSD of the inter-day precision was less than 12.3%. The whole procedure for both derivatization and analysis was quick and simple, and the total time was less than 1h. This established method has been successfully employed for determination of spiking samples both in water and soil. A detection limit of 0.1 ng/mL was achieved for river water, while the SM in soil sample could be detected at 0.1 ng/g.

MATÉRIAUX
Numéro du produit
Marque
Description du produit

Sigma-Aldrich
Acétonitrile, suitable for HPLC, gradient grade, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, suitable for HPLC, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Dichlorométhane, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, suitable for HPLC, gradient grade, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acétonitrile, HPLC Plus, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Dichlorométhane, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acide formique, reagent grade, ≥95%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Dichlorométhane, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, HPLC Plus, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Hexane, suitable for HPLC, ≥97.0% (GC)
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acétonitrile, ACS reagent, ≥99.5%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Hexane, ReagentPlus®, ≥99%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Dichlorométhane, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Hexane, suitable for HPLC, ≥95%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acide formique, ACS reagent, ≥96%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acétonitrile, anhydrous, 99.8%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acide formique, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, anhydrous, 99.8%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Hexane, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acétonitrile, suitable for HPLC, gradient grade, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Hexane, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acétonitrile, ≥99.9% (GC)
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acide formique, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, Laboratory Reagent, ≥99.6%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Méthanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Dichlorométhane, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Acide formique, ACS reagent, ≥88%
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Sigma-Aldrich
Dichlorométhane, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Le tarif et la disponibilité ne sont pas disponibles actuellement.