Saltar al contenido
Merck

Quality assessment of the blue mussel (Mytilus edulis): comparison between commercial and wild types.

Marine pollution bulletin (2014-06-28)
B De Witte, L Devriese, K Bekaert, S Hoffman, G Vandermeersch, K Cooreman, J Robbens
RESUMEN

This study compared species identity, microplastics, chemical and microbial contamination between consumption mussels and wild type mussels, collected at Belgian department stores and Belgian groynes and quaysides, respectively. Species identification based on genetic analysis showed a high number of Mytilus (M.) edulis compared to M. galloprovincialis and M. edulis/galloprovincialis hybrid mussels. The number of total microplastics varied from 2.6 to 5.1 fibres/10 g of mussel. A higher prevalence of orange fibres at quaysides is related to fisheries activities. Chemical contamination of polycyclic aromatic hydrocarbons and polychlorobiphenyls could be related to industrial activities and water turbidity, with maximum concentrations at the quayside of port Zeebrugge. The inverse was noted for Escherichia coli contamination, which was relatively low at Zeebrugge quayside with a total count of 3.9 × 10(2)CFU/100 g tissue, due to limited agricultural effluents. Results of this complementary analysis stress the importance of integrated monitoring and quality assessment.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido nítrico, ACS reagent, 70%
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Sulfato de sodio, ACS reagent, ≥99.0%, anhydrous, granular
Sigma-Aldrich
Sulfato de sodio, ACS reagent, ≥99.0%, anhydrous, powder
Sigma-Aldrich
Ácido perclórico, ACS reagent, 70%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Hexano, ReagentPlus®, ≥99%
Sigma-Aldrich
Hexano, suitable for HPLC, ≥95%
Sigma-Aldrich
Ácido nítrico, 70%, purified by redistillation, ≥99.999% trace metals basis
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Ácido nítrico, puriss. p.a., 65.0-67.0%
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Sulfato de sodio, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Hexano, Laboratory Reagent, ≥95%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ácido perclórico, 70%, 99.999% trace metals basis
Sigma-Aldrich
Ácido perclórico, ACS reagent, 60%
Sigma-Aldrich
Hexano, anhydrous, 95%
Sigma-Aldrich
Cloroformo, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformo, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Sulfato de sodio, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99%
Sigma-Aldrich
Cloroformo, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Supelco
Hexano, analytical standard
Sigma-Aldrich
Cloroformo, biotech. grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Supelco
Ácido nítrico solution, 0.1 M HNO3 in water (0.1N), eluent concentrate for IC
Sigma-Aldrich
Ácido nítrico, ACS reagent, ≥90.0%
Sigma-Aldrich
Sulfato de sodio, anhydrous, free-flowing, Redi-Dri, ReagentPlus®, ≥99%