Saltar al contenido
Merck
  • Distribution and composition pattern of polycyclic aromatic hydrocarbons in different tissues of sturgeons collected from Iranian coastline of the Caspian Sea.

Distribution and composition pattern of polycyclic aromatic hydrocarbons in different tissues of sturgeons collected from Iranian coastline of the Caspian Sea.

Chemosphere (2014-12-03)
Abdulreza Mashroofeh, Alireza Riyahi Bakhtiari, Mohammad Pourkazemi
RESUMEN

The levels of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in the liver, kidney, gills and muscle tissues of Persian sturgeon (Acipenser persicus; n=16), and Stellate sturgeon (Acipenser stellatus; n=7) collected from coastal waters of the South Caspian Sea from March and April 2011. The distribution and composition pattern of PAHs in the different tissues of sturgeons, and the effects of lipid content in sturgeon tissues and the octanol-water partition coefficient (Kow) of PAHs congeners on them were analyzed. The levels of total PAHs in the various tissues of Persian sturgeon and Stellate sturgeon ranged from 2.095 to 6.587 and 1.942 to 6.206 μg g(-1)dw, respectively. Stellate sturgeon showed significantly higher levels of heavy PAHs (⩾ 4-rings) than Persian sturgeon. The analysis has revealed a high degree of differential accumulation of the studied PAHs in the tissues of the both species. Low molecular weight PAHs predominated in the sturgeons, accounting for 81.89% of the total PAHs. Among the sixteen tested PAHs, naphthalene was the most dominant congener, followed by phenanthrene and fluorene. The PAHs levels and distribution in the tissues of sturgeons are dependent on both the Kow of PAH congeners and the lipid content in these tissues. There was a significant positive relationship (r=0.868, p<0.005) between lipid content and PAHs levels. The statistically significant negative relationships (p<0.01) were found between log Kow and log-transformed PAHs levels for muscle tissues of both sturgeon species.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetona, ACS reagent, ≥99.5%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Acetona, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Diclorometano, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Hidróxido de potasio, ACS reagent, ≥85%, pellets
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Acetona, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Diclorometano, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Hexano, ReagentPlus®, ≥99%
Sigma-Aldrich
Hexano, suitable for HPLC, ≥95%
Sigma-Aldrich
Hidróxido de potasio, reagent grade, 90%, flakes
Sigma-Aldrich
Potassium hydroxide solution, 45 wt. % in H2O
Sigma-Aldrich
Hidróxido de potasio, semiconductor grade, pellets, 99.99% trace metals basis (Purity excludes sodium content.)
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Hidróxido de potasio, ≥85% KOH basis, pellets, white
Supelco
Potassium hydroxide solution, volumetric, 8.0 M KOH (8.0N)
Sigma-Aldrich
Diclorometano, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Metanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Hexano, Laboratory Reagent, ≥95%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer