Saltar al contenido
Merck

Novel bioactive polyester scaffolds prepared from unsaturated resins based on isosorbide and succinic acid.

Materials science & engineering. C, Materials for biological applications (2014-12-11)
Monika Smiga-Matuszowicz, Bartosz Janicki, Katarzyna Jaszcz, Jan Łukaszczyk, Marcin Kaczmarek, Marta Lesiak, Aleksander L Sieroń, Wojciech Simka, Maciej Mierzwiński, Damian Kusz
RESUMEN

In this study new biodegradable materials obtained by crosslinking poly(3-allyloxy-1,2-propylene succinate) (PSAGE) with oligo(isosorbide maleate) (OMIS) and small amount of methyl methacrylate were investigated. The porous scaffolds were obtained in the presence of a foaming system consisted of calcium carbonate/carboxylic acid mixture, creating in situ porous structure during crosslinking of liquid formulations. The maximum crosslinking temperature and setting time, the cured porous materials morphology as well as the effect of their porosity on mechanical properties and hydrolytic degradation process were evaluated. It was found that the kind of carboxylic acid used in the foaming system influenced compressive strength and compressive modulus of porous scaffolds. The MTS cytotoxicity assay was carried out for OMIS using hFOB1.19 cell line. OMIS resin was found to be non-toxic in wide range of concentrations. On the ground of scanning electron microscopy (SEM) observations and energy X-ray dispersive analysis (EDX) it was found that hydroxyapatite (HA) formation at the scaffolds surfaces within short period of soaking in phosphate buffer solution occurs. After 3h immersion a compact layer of HA was observed at the surface of the samples. The obtained results suggest potential applicability of resulted new porous crosslinked polymeric materials as temporary bone void fillers.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Cloroformo-d, 99.8 atom % D
Sigma-Aldrich
Cloroformo-d, 99.8 atom % D, contains 0.03 % (v/v) TMS
Sigma-Aldrich
Carbonato de calcio, ACS reagent, ≥99.0%, powder
Sigma-Aldrich
Metilmetacrilato, contains ≤30 ppm MEHQ as inhibitor, 99%
Sigma-Aldrich
Ácido pirúvico, 98%
Sigma-Aldrich
Carbonato de calcio, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E170, precipitated, 98.5-100.5% (based on anhydrous substance)
Sigma-Aldrich
Maleic anhydride, 99%
Sigma-Aldrich
Cloroformo-d, 99.8 atom % D, contains 0.05 % (v/v) TMS
Sigma-Aldrich
Cloroformo-d, 99.8 atom % D, contains 1 % (v/v) TMS
Sigma-Aldrich
Succinic anhydride, ≥99% (GC)
Sigma-Aldrich
Phenylacetic acid, 99%
Supelco
Carbonato de calcio, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Carbonato de calcio, ReagentPlus®
Sigma-Aldrich
Cloroformo-d, 99.8 atom % D, contains 0.1 % (v/v) TMS
Sigma-Aldrich
Metilmetacrilato, 99%, stabilized
Sigma-Aldrich
Carbonato de calcio, powder, ≤50 μm particle size, 98%
Sigma-Aldrich
Carbonato de calcio, ACS reagent, 99.95-100.05% dry basis
Supelco
Carbonato de calcio, reference material for titrimetry, certified by BAM, ≥99.5%
Sigma-Aldrich
Cloroformo-d, ≥99.8 atom % D, contains 0.5 wt. % silver foil as stabilizer, 0.03 % (v/v) TMS
Sigma-Aldrich
Cloroformo-d, ≥99.8 atom % D, contains 0.5 wt. % silver foil as stabilizer
Sigma-Aldrich
Ácido pirúvico, ≥97%, FG
Sigma-Aldrich
Cloroformo-d, "100%", 99.95 atom % D
Sigma-Aldrich
Cloroformo-d, "100%", 99.96 atom % D, contains 0.03 % (v/v) TMS
Sigma-Aldrich
Phenylacetic acid, ≥99%, FCC, FG
Sigma-Aldrich
Ácido pirúvico, 95%
Sigma-Aldrich
Carbonato de calcio, 99.999% trace metals basis
Sigma-Aldrich
4,N,N-Trimethylaniline, 99%
Sigma-Aldrich
Maleic anhydride, puriss., ≥99.0% (NT)
Sigma-Aldrich
Cloroformo-d, ≥99.8 atom % D, anhydrous
Sigma-Aldrich
Ácido pirúvico, natural, ≥95%, FG