Przejdź do zawartości
Merck

Aluminum toxicity recovery processes in root apices. Possible association with oxidative stress.

Plant science : an international journal of experimental plant biology (2012-02-14)
Hideaki Matsumoto, Hirotoshi Motoda
ABSTRAKT

Al inhibits root apex elongation with concomitant morphological injuries such as ruptures punctuated by the regions stained with Evans blue. The recovery can be investigated by transfer of Al-injured roots to a solution lacking Al. In the Al-injured root apex, superoxide anion, H(2)O(2), Al, and lignin accumulate. During the recovery process, the central cylinder elongates leaving the region stained with Evans blue without marked disappearance. The obvious function of the region is not clear but may trigger the elongation of central cylinder during the recovery process. Thus the function of the region stained with Evans blue might be derived from the programmed cell-like idea. Oxidative stress concerns events induced under Al toxicity and the recovery process. The superoxide anion is primarily formed by plasma membrane-associated NADPH oxidase and is dismuted to H(2)O(2) and O(2) by superoxide dismutase. H(2)O(2) provides the electrons for the polymerization of phenolics to lignin, which causes the stiffening of the cell wall. The distortion of the cell wall caused by lignin may induce the breaking and tearing of cells, which results in the formation of ruptures at the rhizodermis and outer cortex layers. The production of superoxide anion, H(2)O(2), and lignin was reduced during the recovery process and thereby the elongation of the central cylinder may be induced.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Aluminum, microleaf disks, 10mm, thinness 1.0μm, specific density 269.9μg/cm2, removable support, 99.999%
Aluminum, mesh, 900x900mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminum, microfoil, disks, 25mm, thinness 1.0μm, specific density 269.9μg/cm2, permanent mylar 3.5μm support, 99.999%
Aluminum, insulated wire, 2m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, microleaf disks, 25mm, thinness 0.15μm, specific density 41.28μg/cm2, removable support, 99.999%
Aluminum, microleaf disks, 25mm, thinness 0.5μm, specific density 120.6μg/cm2, removable support, 99.999%
Aluminum, insulated wire, 1m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, insulated wire, 20m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, honeycomb, 300x300mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%
Aluminum, honeycomb, 600x600mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%
Aluminum, honeycomb, 300x300mm, thickness 5mm, cell size 19mm, cell wall 0.064mm, core density 0.029g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, honeycomb, 300x300mm, thickness 20mm, cell size 4.8mm, cell wall 0.038mm, core density 0.070g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, honeycomb, 600x600mm, thickness 10mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, honeycomb, 600x600mm, thickness 52.3mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin glass fiber 0.75mm, 99.9%
Aluminum, honeycomb, 300x300mm, thickness 10mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), 99.5%
Aluminum, foam, 150x150mm, thickness 6.35mm, bulk density 0.2g/cm3, porosity 0.93, 8 pores/cm, aluminum 6101 grade, 98.5%
Aluminum, rod, 100mm, diameter 12.0mm, as drawn, 99.999%
Aluminum, tube, 200mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%
Aluminum, rod, 200mm, diameter 10.0mm, as drawn, 99.999%
Aluminum, rod, 100mm, diameter 12.7mm, 99%
Aluminum, tube, 200mm, outside diameter 0.30mm, inside diameter 0.2mm, wall thickness 0.05mm, as drawn, 99.5%
Aluminum, wire reel, 0.5m, diameter 0.5mm, as drawn, 99.999%
Aluminum, tube, 1000mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%
Aluminum, tube, 500mm, outside diameter 0.55mm, inside diameter 0.4mm, wall thickness 0.075mm, as drawn, 99.5%
Aluminum, rod, 200mm, diameter 12.7mm, 99%
Aluminum, rod, 100mm, diameter 20.0mm, as drawn, 99.999%
Aluminum, rod, 200mm, diameter 12.0mm, as drawn, 99.999%
Aluminum, wire reel, 100m, diameter 0.25mm, as drawn, 99.5%
Aluminum, sphere, 100pcs, diameter 3.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Aluminum, wire reel, 1000m, diameter 0.7mm, as drawn, 99.5%