Przejdź do zawartości
Merck
  • PmMGST3, a novel microsomal glutathione S-transferase gene in the dinoflagellate Prorocentrum minimum, is a potential biomarker of oxidative stress.

PmMGST3, a novel microsomal glutathione S-transferase gene in the dinoflagellate Prorocentrum minimum, is a potential biomarker of oxidative stress.

Gene (2014-05-27)
Ruoyu Guo, Vinitha Ebenezer, Jang-Seu Ki
ABSTRAKT

In this study, we evaluated a novel microsomal glutathione S-transferase3 (MGST3) gene from the dinoflagellate Prorocentrum minimum, and examined its expression pattern in response to copper-and nickel-induced stresses. The full length of PmMGST3 was 732 bp, ranging from the dinoflagellate splice leader (DinoSL) sequence to the poly (A) tail, covering a 441-bp ORF, 97-bp 5'UTR, and 194-bp 3'UTR. The PmMGST3 was up-regulated by metals, including copper and nickel. The highest up-regulation levels of the PmMGST3 were found under 0.1 mg/L copper and 0.5 mg/L nickel treatment, respectively. In addition, the PmMGST3 was gradually up-regulated by 0.1 mg/L copper with increasing exposure time. Furthermore, ROS production and reduced GSH was measured in the copper treated cells. A significant increased ROS production and reduced GSH were found in the copper treated cells. These results suggest that PmMGST3 may be related to defense mechanisms associated with oxidative stress in dinoflagellates.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Nickel, powder, <150 μm, 99.99% trace metals basis
Nickel, foil, 2m coil, thickness 0.0125mm, annealed, 99%
Copper, rod, 500mm, diameter 4.8mm, as drawn, 99.99+%
Copper, insulated wire, 10m, conductor diameter 0.7mm, insulation thickness 0.01mm, polyurethane insulation
Nickel, foil, 8mm disks, thickness 0.025mm, as rolled, 100%
Nickel, foil, 6mm disks, thickness 0.05mm, as rolled, 99.98%
Nickel, foil, light tested, 100x100mm, thickness 0.05mm, annealed, 99%
Nickel, foil, light tested, 100x100mm, thickness 0.05mm, as rolled, 100%
Copper, rod, 1000mm, diameter 4.8mm, hard, 99.9%
Nickel, foil, 8mm disks, thickness 0.05mm, as rolled, 99.99+%
Copper, mesh, 100x100mm, nominal aperture 0.14mm, thickness 0.25mm, wire diameter 0.115mm, 100x100 wires/inch, open area 30.3%, plain weave mesh
Nickel, foil, 8mm disks, thickness 0.008mm, 99.95%
Copper, insulated wire, 20m, conductor diameter 0.5mm, insulation thickness 0.025mm, polyimide insulation, 99.99%
Nickel, foil, 150x150mm, thickness 0.125mm, as rolled, 99.99+%
Nickel, foil, light tested, 25x25mm, thickness 0.05mm, annealed, 99%
Nickel, foil, light tested, 25x25mm, thickness 0.03mm, 99.9%
Nickel, foil, light tested, 200x200mm, thickness 0.05mm, as rolled, 99.98%
Copper, insulated wire, 20m, conductor diameter 0.05mm, insulation thickness 0.002mm, 2 micron polyesterimide insulation, 99.9%
Copper, rod, 1000mm, diameter 9.5mm, hard, 99.9%
Nickel, foil, 6mm disks, thickness 0.125mm, as rolled, 100%
Nickel, foil, not light tested, 100x100mm, thickness 0.007mm, 99.95%
Nickel, foil, 8mm disks, thickness 0.005mm, as rolled, 99.9%
Copper, insulated wire, 20m, conductor diameter 0.24mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation
Nickel, foil, 2m coil, thickness 0.0075mm, 99.9%
Copper, rod, 100mm, diameter 2.0mm, as drawn, 99.99+%
Copper, insulated wire, 5m, conductor diameter 0.018mm, insulation thickness 0.005mm, polyurethane insulation, 99.99%
Nickel, foil, 8mm disks, thickness 0.125mm, as rolled, 99.99+%
Nickel, foil, 6mm disks, thickness 0.50mm, annealed, 99%
Copper, rod, 200mm, diameter 4.8mm, as drawn, 99.99+%
Nickel, foil, 6mm disks, thickness 0.05mm, as rolled, 100%