Przejdź do zawartości
Merck
  • Mechanisms of Cu2+ migration, recovery and detoxification in Cu2+-, SO4(2-) -containing wastewater treatment process with anaerobic granular sludge.

Mechanisms of Cu2+ migration, recovery and detoxification in Cu2+-, SO4(2-) -containing wastewater treatment process with anaerobic granular sludge.

Environmental technology (2014-06-25)
Xiaolei Cao, Hongbin Cao, Yuxing Sheng, Yongbing Xie, Kai Zhang, Yi Zhang, John C Crittenden
ABSTRAKT

In this study, anaerobic granular sludge with sulphate-reducing bacteria (SRB) was applied to treat Cu2+-, SO4(2-) -containing wastewater in an expanded granular sludge bed reactor. The migration and enrichment of copper in anaerobic granular sludge were envaluated. By analysing the sludge with X-ray diffraction, copper was determined to be present as covellite (CuS) in the sludge. Observations at the microscopic level showed that CuS precipitates were absorbed onto granules and gradually migrated from the outer to the interior layer of the granule over time and finally accumulated in the core of the granular sludge. Because of the migration of the CuS precipitates and the protection of the extracellular polymeric substances matrix, SRB were able to tolerate copper concentrations up to 10 mg/L. A copper removal efficiency of about 96% was observed at a steady state for 3 months, and copper was enriched in the granular sludge.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Copper (S, P), BCR®, certified reference material, chips
Copper, IRMM®, certified reference material, 0.1 mm foil
Copper, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Copper, ACS reagent, granular, 10-40 mesh, ≥99.90%
Copper, wire reel, 50m, diameter 0.5mm, as drawn, 99.98+%
Copper, wire reel, 20m, diameter 0.25mm, annealed, 99.9%
Copper, tube, 200mm, outside diameter 1.75mm, inside diameter 0.33mm, wall thickness 0.71mm, as drawn, 99.9%
Sigma-Aldrich
Copper, shot, −3-+14 mesh, 99%
Sigma-Aldrich
Copper, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, powder (spheroidal), 10-25 μm, 98%
Sigma-Aldrich
Copper, powder, 99.99% trace metals basis
Sigma-Aldrich
Copper, nanopowder, 40-60 nm particle size (SAXS), ≥99.5% trace metals basis
Sigma-Aldrich
Copper, nanopowder, 60-80 nm particle size (APS), ≥99.5% trace metals basis
Sigma-Aldrich
Copper, powder (dendritic), <45 μm, 99.7% trace metals basis
Copper - O.F.H.C., foil, 300x300mm, thickness 0.25mm, annealed, 99.95+%
Copper - O.F.H.C., foil, 100x100mm, thickness 0.1mm, hard, 99.95+%
Copper, mesh, 100x100mm, nominal aperture 0.14mm, thickness 0.25mm, wire diameter 0.115mm, 100x100 wires/inch, open area 30.3%, plain weave mesh
Copper, wire reel, 1000m, diameter 0.25mm, annealed, 99.9%
Copper - O.F.H.C., rod, 1000mm, diameter 12.7mm, as drawn, 99.95+%
Sigma-Aldrich
Copper, powder, <425 μm, 99.5% trace metals basis
Copper, rod, 100mm, diameter 2.0mm, as drawn, 99.99+%
Copper, wire reel, 1000m, diameter 0.04mm, annealed, 99.9%
Copper, rod, 50mm, diameter 5.0mm, as drawn, 99.999%
Copper - O.F.H.C., wire reel, 2m, diameter 2.0mm, hard, 99.95+%
Copper, wire reel, 25m, diameter 0.125mm, as drawn, 99.99+%
Copper (O), BCR®, certified reference material, rod
Copper - O.F.H.C., tube, 100mm, outside diameter 9.5mm, inside diameter 7.9mm, wall thickness 0.8mm, 99.95+%
Copper, tube, 200mm, outside diameter 10.4mm, inside diameter 10mm, wall thickness 0.2mm, as drawn, 99.9%
Copper, wire reel, 20m, diameter 0.05mm, as drawn, 99.99+%
Copper, tube, 100mm, outside diameter 6.35mm, inside diameter 4.93mm, wall thickness 0.71mm, as drawn, 99.9%