Przejdź do zawartości
Merck

Speciation of phosphorus in the sediments of Lake Bini (Ngaoundere-Cameroon).

Environmental technology (2014-06-25)
Joseph Marie Sieliechi, Jean-Marie Dangwang Dikdim, Guy Bertrand Noumi
ABSTRAKT

In this study, spatial and seasonal variations of phosphorus fractions in Lake Bini sediments were evaluated using a sequential extraction method. The sampling of water and sediments (surface and coring) was carried out at seven sites around the lake during the dry season and the rainy season. The results showed that phosphorus is mainly in the inorganic form (L-P+Ca-P+Fe-P) in the sediments whatever the season may be. The rank order of phosphorus extracts obtained was Fe-P>Ca-P>OM-P>L-P>Res-P. The maximum values of phosphorus (sum of each fraction) were obtained in the rainy season at the sites D6 (298.12 +/- 12.37 microg P/g) and D4 (244.93 +/- 11.06 microg P/g) located beside water source 2 and farmland 2, respectively. The average values of the phosphorus content vary from 05.29 +/- 1.05 microg P/g to 102.58 +/- 4.62 microg P/g for the upper layer (0-5 cm depth); 04.67 +/- 0.66 microg P/g to 70.06 +/- 2.82 microg P/g for the medium layer (5-10 cm depth) and finally 04.63 +/- 0.98 microg P/g to 55.24 +/- 5.17 microg P/g for the deep layer (10-15 cm depth). The results of principal component analysis showed that processes which enhance Ca-P and Fe-P accumulation are probably related to the same factor and the origin of P depends on the source of pollution. The nature of the season plays a significant role in the geochemical composition of the sediments in phosphorus and on the eutrophication level of Lake Bini.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Iron, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Iron, foil, 25x25mm, thickness 1.0mm, as rolled, 99.5%
Iron, foil, not light tested, 50x50mm, thickness 0.01mm, 99.99+%
Iron, rod, 500mm, diameter 40mm, as drawn, armcO« soft ingot 99.8%
Iron, foil, 50x50mm, thickness 0.5mm, hard, 99.5%
Iron, foil, 50x50mm, thickness 0.125mm, as rolled, 99.99+%
Iron, tube, 100mm, outside diameter 10.6mm, inside diameter 10.0mm, wall thickness 0.3mm, as drawn, 99.8+%
Iron, foil, 100x100mm, thickness 2.0mm, as rolled, armco« soft ingot 99.8%
Iron, wire reel, 0.5m, diameter 0.13mm, hard, 99.99+%
Iron, foil, 10m coil, thickness 0.038mm, hard, 99.5%
Iron, tube, 200mm, outside diameter 12.0mm, inside diameter 9mm, wall thickness 1.5mm, annealed, 99.5%
Iron, wire reel, 20m, diameter 0.25mm, hard, 99.5%
Iron, foil, 300x300mm, thickness 0.25mm, hard, 99.5%
Iron, wire reel, 100m, diameter 0.125mm, hard, 99.5%
Iron, tube, 500mm, outside diameter 8.0mm, inside diameter 5mm, wall thickness 1.5mm, annealed, 99.5%
Iron, tube, 200mm, outside diameter 25.0mm, inside diameter 21mm, wall thickness 2mm, annealed, 99.5%
Iron, foil, 300x300mm, thickness 1.0mm, as rolled, armco« soft ingot 99.8%
Iron, tube, 100mm, outside diameter 1.0mm, inside diameter 0.8mm, wall thickness 0.1mm, as drawn, 99.5%
Iron, rod, 1000mm, diameter 12.7mm, as drawn, 98+%
Iron, foil, 10m coil, thickness 0.05mm, hard, 99.5%
Iron, tube, 200mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.5%
Iron, wire reel, 5m, diameter 0.25mm, annealed, 99.99+%
Iron, wire reel, 2000m, diameter 0.125mm, hard, 99.5%
Iron, foil, 300x300mm, thickness 0.125mm, hard, 99.5%
Iron, rod, 500mm, diameter 50mm, as drawn, armcO« soft ingot 99.8%
Iron, foil, 10m coil, thickness 0.20mm, hard, 99.5%
Iron, tube, 100mm, outside diameter 3.18mm, inside diameter 1.96mm, wall thickness 0.61mm, as drawn, 99.5%