Przejdź do zawartości
Merck

Ultrasound-assisted surfactant-enhanced emulsification microextraction for the determination of Cd and Ni in tea and water samples.

Environmental technology (2014-08-26)
Maryam Ezoddin, Tayebeh Taghizadeh, Behrooz Majidi
ABSTRAKT

A microextraction method based on ultrasound-assisted surfactant-enhanced emulsification using solidification of a floating organic droplet (UASEME-SFO) was evaluated for simultaneous determination of Cd and Ni in water and tea samples followed by flame atomic absorption spectrometry. In the UASEME-SFO technique, Triton X-100 was used as an emulsifier to accelerate the emulsification of the extraction solvent into a sample solution and hasten the mass transfer of the analytes. Analytes form a complex and are extracted into 1-dodecanol which was used as an extraction solvent. Some parameters such as type and volume of the extraction solvent, the type and concentration of the surfactant, ultrasound extraction time, reagent concentration, centrifuge conditions and salt concentration were investigated. Under optimum conditions, calibration curves were linear in the range of 0.3-100 and 0.6-180 microg L(-1) with detection limits of 0.11 and 0.20 microg L(-1) for Cd and Ni, respectively. The accuracy of the method was confirmed by parallel analyses using the certified reference material of water and tea samples. The recoveries of the analytes in tea leaves, tea infusions and water samples were in the range of 96.5-105.1%.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Nickel, powder, <150 μm, 99.99% trace metals basis
Sigma-Aldrich
Cadmium, shot, 3 mm, 99.999% trace metals basis
Nickel, foil, 2m coil, thickness 0.0125mm, annealed, 99%
Nickel, foil, 8mm disks, thickness 0.025mm, as rolled, 100%
Nickel, foil, 6mm disks, thickness 0.05mm, as rolled, 99.98%
Nickel, foil, light tested, 100x100mm, thickness 0.05mm, annealed, 99%
Nickel, foil, light tested, 100x100mm, thickness 0.05mm, as rolled, 100%
Nickel, foil, 8mm disks, thickness 0.05mm, as rolled, 99.99+%
Nickel, foil, 8mm disks, thickness 0.008mm, 99.95%
Nickel, foil, 150x150mm, thickness 0.125mm, as rolled, 99.99+%
Nickel, foil, light tested, 25x25mm, thickness 0.05mm, annealed, 99%
Nickel, foil, light tested, 25x25mm, thickness 0.03mm, 99.9%
Nickel, foil, light tested, 200x200mm, thickness 0.05mm, as rolled, 99.98%
Nickel, foil, 6mm disks, thickness 0.125mm, as rolled, 100%
Nickel, foil, not light tested, 100x100mm, thickness 0.007mm, 99.95%
Nickel, foil, 8mm disks, thickness 0.005mm, as rolled, 99.9%
Nickel, foil, 2m coil, thickness 0.0075mm, 99.9%
Nickel, foil, 8mm disks, thickness 0.125mm, as rolled, 99.99+%
Nickel, foil, 6mm disks, thickness 0.50mm, annealed, 99%
Nickel, foil, 6mm disks, thickness 0.05mm, as rolled, 100%
Nickel, foil, 100x100mm, thickness 0.25mm, as rolled, 99.999%
Nickel, foil, light tested, 25x25mm, thickness 0.015mm, 99.9%
Nickel, foil, not light tested, 300x300mm, thickness 0.0075mm, 99.9%
Nickel, foil, 25mm disks, thickness 0.20mm, annealed, 99%
Cadmium, foil, 4mm disks, thickness 1.0mm, as rolled, 100%
Nickel, microfoil, disks, 10mm, thinness 0.1μm, specific density 93.4μg/cm2, permanent mylar 3.5μm support, 99.99+%
Nickel, foil, 25mm disks, thickness 0.5mm, as rolled, 99.99+%
Nickel, foil, not light tested, 100x100mm, thickness 0.009mm, 99.95%
Nickel, pellets, 100g, max. size 15mm, 99.99+%
Nickel, foil, 50x50mm, thickness 1.6mm, 99%