Przejdź do zawartości
Merck
  • History of bioavailable lead and iron in the Greater North Sea and Iceland during the last millennium - a bivalve sclerochronological reconstruction.

History of bioavailable lead and iron in the Greater North Sea and Iceland during the last millennium - a bivalve sclerochronological reconstruction.

Marine pollution bulletin (2014-09-02)
Hilmar A Holland, Bernd R Schöne, Soraya Marali, Klaus P Jochum
ABSTRAKT

We present the first annually resolved record of biologically available Pb and Fe in the Greater North Sea and Iceland during 1040-2004 AD based on shells of the long-lived marine bivalve Arctica islandica. The iron content in pre-industrial shells from the North Sea largely remained below the detection limit. Only since 1830, shell Fe levels rose gradually reflecting the combined effect of increased terrestrial runoff of iron-bearing sediments and eutrophication. Although the lead gasoline peak of the 20th century was well recorded by the shells, bivalves that lived during the medieval heyday of metallurgy showed four-fold higher shell Pb levels than modern specimens. Presumably, pre-industrial bivalves were offered larger proportions of resuspended (Pb-enriched) organics, whereas modern specimens receive fresh increased amounts of (Pb-depleted) phytoplankton. As expected, metal loads in the shells from Iceland were much lower. Our study confirms that bivalve shells provide a powerful tool for retrospective environmental biomonitoring.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Iron, rod, 50mm, diameter 6.0mm, as drawn, 99.99+%
Iron, foil, 10mm disks, thickness 0.0125mm, 99.99+%
Iron, foil, 100x100mm, thickness 0.5mm, as rolled, 99.99+%
Iron, tube, 1000mm, outside diameter 6.35mm, inside diameter 5.35mm, wall thickness 0.5mm, as drawn, 99.8%
Iron, foil, 50x50mm, thickness 1.83mm, Quarter hard, 99.5%
Iron, wire reel, 2m, diameter 0.13mm, hard, 99.99+%
Iron, tube, 1000mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.5%
Iron, tube, 100mm, outside diameter 1.65mm, inside diameter 0.89mm, wall thickness 0.38mm, as drawn, 99.8+%
Iron, rod, 50mm, diameter 8.0mm, as drawn, 99.99+%
Iron, foil, 10mm disks, thickness 0.015mm, 99.85%
Iron, rod, 500mm, diameter 3.2mm, as drawn, 98+%
Iron, tube, 500mm, outside diameter 10.0mm, inside diameter 7mm, wall thickness 1.5mm, annealed, 99.5%
Iron, foil, 25x25mm, thickness 3.1mm, as rolled, 99.95%
Iron, tube, 100mm, outside diameter 2.0mm, inside diameter 1.08mm, wall thickness 0.46mm, as drawn, 99.5%
Iron, rod, 200mm, diameter 40mm, as drawn, armcO« soft ingot 99.8%
Iron, rod, 500mm, diameter 4.8mm, as drawn, 98+%
Iron, tube, 200mm, outside diameter 2.30mm, inside diameter 2.07mm, wall thickness 0.115mm, as drawn, 99.5%
Iron, tube, 200mm, outside diameter 2.0mm, inside diameter 1.08mm, wall thickness 0.46mm, as drawn, 99.5%
Iron, tube, 1000mm, outside diameter 4.0mm, inside diameter 3.6mm, wall thickness 0.2mm, as drawn, 99.5%
Iron, foil, 25x25mm, thickness 1.0mm, as rolled, 99.99+%
Iron, foil, 100x100mm, thickness 0.5mm, hard, 99.5%
Iron, foil, 100x100mm, thickness 0.38mm, hard, 99.5%
Iron, tube, 500mm, outside diameter 20.0mm, inside diameter 16mm, wall thickness 2.0mm, annealed, 99.5%
Iron, rod, 500mm, diameter 12.7mm, as drawn, 98+%
Iron, foil, 50x50mm, thickness 2.0mm, as rolled, 99.95%
Iron, foil, 10mm disks, thickness 0.006mm, 99.85%
Iron, foil, 100x100mm, thickness 1.83mm, Quarter hard, 99.5%
Iron, rod, 500mm, diameter 2.0mm, as drawn, 99.99+%
Iron, rod, 200mm, diameter 30mm, as drawn, armcO« soft ingot 99.8%
Iron, tube, 200mm, outside diameter 1.65mm, inside diameter 0.89mm, wall thickness 0.38mm, as drawn, 99.8+%