Adhesive strength of the luting technique for passively fitting screw-retained implant-supported prostheses: an in vitro evaluation.

Adhesive strength of the luting technique for passively fitting screw-retained implant-supported prostheses: an in vitro evaluation.

The International journal of prosthodontics (2015-01-15)

Maria Menini, Francesco Pera, Marco Migliorati, Paolo Pesce, Paolo Pera

ABSTRAKT

This in vitro study evaluated the adhesive strength of a technique to lute implant cylinders to metal frameworks in implant-supported prostheses and ensure a good passive fit. Different height samples were tested: In group 1, implant cylinders were 5 mm long; in group 2, they were 10 mm long. A universal testing machine (Instron) was used to perform pullout tests. The luting technique provided enough adhesive strength for clinical use with greater adhesive strength in group 2 (mean pull-out strength: 2.85 kN in group 1 versus 3.79 kN in group 2). The luting technique provides enough adhesive strength for clinical use. Moreover, specimens with a larger surface for adhesion demonstrated higher adhesive strength compared with shorter specimens.

MATERIAŁY

Numer produktu

Marka

Opis produktu

266035

Sigma-Aldrich

Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis

369489

Sigma-Aldrich

Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis

460400

Sigma-Aldrich

Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis

305812

Sigma-Aldrich

Titanium, ≤10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

348791

Sigma-Aldrich

Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis

267902

Sigma-Aldrich

Titanium, wire, diam. 0.81 mm, 99.7% trace metals basis

348848

Sigma-Aldrich

Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis

IRMM531C

Titanium, IRMM^®, certified reference material, 0.5 mm wire

IRMM531B

Titanium, IRMM^®, certified reference material, 0.5 mm foil

GF24976525

Titanium, rod, 200mm, diameter 25mm, annealed, 99.6+%

GF32801251

Titanium, tube, 1000mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+%

GF88742054

Titanium, tube, 200mm, outside diameter 4.25mm, inside diameter 3.75mm, wall thickness 0.25mm, annealed, 99.6+%

GF91672139

Titanium, wire reel, 20m, diameter 0.05mm, hard, 99.8%

GF56868766

Titanium, wire reel, 25m, diameter 1.0mm, annealed, 99.6+%

GF00761217

Titanium, wire reel, 200m, diameter 0.25mm, as drawn, 99.6+%

GF96391402

Titanium, wire reel, 25m, diameter 0.20mm, annealed, 99.6+%

GF36425707

Titanium, wire reel, 200m, diameter 0.20mm, annealed, 99.6+%

GF31085760

Titanium, wire reel, 5m, diameter 0.25mm, as drawn, 99.99+%

GF43519945

Titanium, wire reel, 2m, diameter 1.0mm, as drawn, 99.99+%

GF34996685

Titanium, wire reel, 200m, diameter 0.125mm, annealed, 99.6+%

GF46592949

Titanium, wire, straight, 1000mm, diameter 1.0mm, as drawn, 99.6+%

GF43403431

Titanium, wire reel, 500m, diameter 0.20mm, annealed, 99.6+%

GF14377631

Titanium, wire reel, 25m, diameter 0.25mm, annealed, 99.6+%

GF47404201

Titanium, wire reel, 5m, diameter 0.20mm, annealed, 99.6+%

GF91204466

Titanium, wire reel, 5m, diameter 1.0mm, as drawn, 99.6+%

GF66991179

Titanium, rod, 100mm, diameter 2mm, as drawn, 99.99+%

GF04311638

Titanium, rod, 100mm, diameter 6mm, annealed, 99.6+%

GF06082286

Titanium, microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm², permanent mylar 3.5μm support, 99.6+%

GF12929744

Titanium, microfoil, disks, 25mm, thinness 0.25μm, specific density 112.6μg/cm², permanent mylar 3.5μm support, 99.6+%

GF61322699

Titanium, rod, 100mm, diameter 2mm, annealed, 99.6+%