MPGP002A1

Millipak^® Filter

0.22 μm membrane filter for particulate and bacteria-free water at the point of dispense for the Milli-Q^® IQ, IX and EQ 7 series water purification systems.

• Synonym(s): Millipak^® 0.22 μm filter
• eCl@ss: 33050190

Properties

• material: polyethersulfone filter
• Quality Level: 300
• packaging: pkg of 1 unit
• manufacturer/tradename: Millipak^®
• pore size: 0.22 μm pore size
• compatibility: for use with Milli-Q^® EQ 7000; for use with Milli-Q^® EQ 7008; for use with Milli-Q^® EQ 7016; for use with Milli-Q^® IX 7003; for use with Milli-Q^® IX 7005; for use with Milli-Q^® IX 7010; for use with Milli-Q^® IX 7015; for use with Milli-Q^® IQ 7000; for use with Milli-Q^® IQ 7003; for use with Milli-Q^® IQ 7005; for use with Milli-Q^® IQ 7010; for use with Milli-Q^® IQ 7015
• shipped in: ambient

Description

General description

The Millipak^® 0.22μm hydrophilic membrane filter is intended to produce particulate-free and bacteria-free water at the point of dispense of the Milli-Q^® IQ 7000 system, Milli-Q^® IQ 7003/05/10/15, Milli-Q^® IX 7003/05/10/15 and Milli-Q^® EQ 7000/08/16 water purification systems..
The filter is designed with a 0.22μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a styrene-acrylonitrile housing that serves to minimize organic and inorganic extractable release.

Application

Pure and Ultrapure water produced by a Millipak^® 0.22 μm filter is suitable for many different laboratory applications, including microplastics research, nanoparticle studies, food analyses and HPLC analyses.

Features and Benefits

• Each Millipak^® 0.22μm filter is individually tested, hermetically sealed and delivered with a Certificate of Quality.
• Validated to deliver bacteria-free water (<0.01cfu/mL when installed and used in a laminar flow hood).
• Carefree maintenance: Easily installed and replaced.
• Redesigned bottom-tip for a secured installation of the protection bell.
• Validated to deliver particulate-free water (no particles with size >0.22 μm)
• e-Sure tag for RFID connection with E-POD^® or Q-POD^® dispenser enables full traceability (data management) and automatic consumable status monitoring on the POD’s touchscreen interface.

Other Notes

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes and is a device that meets requirements under FIFRA. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany