Saltar al contenido
MilliporeSigma
Get up to 22% off for Pi Day until 3/26.Save Now

Optimization of clean fractionation process applied to switchgrass to produce pulp for enzymatic hydrolysis.

Bioresource technology (2013-01-24)
Grzegorz Brudecki, Iwona Cybulska, Kurt Rosentrater
RESUMEN

The purpose of this study was to fractionate switchgrass (SG) to obtain hemicellulose-, lignin-rich fractions and highly digestible pulp, using a clean fractionation (CF) approach. The main objective was to produce highest glucose yield in the enzymatic hydrolysis of pulp. Effects of processing factors such as time (10-50 min), temperature (120-160 °C), catalyst concentration (0.21-0.93% w/w sulfuric acid) and organic solvent mixture composition (7-43% w/w methyl isobutyl ketone) were evaluated. Response surface methodology and central composite design were used for process optimization and statistical analyses. High lignin (75-93%) and xylan (83-100%) removal from biomass were obtained, leaving solid pulp rich in glucan (78-94%). High enzymatic hydrolysis glucose yields (more than 90%) were obtained for selected optimal conditions. Pulp can be used for ethanol production while separated xylan and lignin fractions can be used as a feedstock for value-added products which suggests the applicability of clean fractionation technology in a biorefinery concept.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido sulfúrico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Ácido sulfúrico, puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0%
Sigma-Aldrich
Ácido sulfúrico, SAJ first grade, ≥95.0%
Supelco
Sulfuric acid concentrate, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC
Sigma-Aldrich
Ácido sulfúrico, JIS special grade, ≥95.0%
Sigma-Aldrich
Ácido sulfúrico, puriss., meets analytical specification of Ph. Eur., BP, 95-97%
Sigma-Aldrich
Sulfuric acid solution, puriss. p.a., ≥25% (T)
Supelco
Ácido sulfúrico, for the determination of nitrogen, ≥97.0%
Sigma-Aldrich
Sulfuric acid solution, 0.5 M
Sigma-Aldrich
Sulfuric acid solution, 0.05 M
Sigma-Aldrich
Sulfuric acid solution, 0.1 M
Sigma-Aldrich
Sulfuric acid solution, 1.5 M
Sigma-Aldrich
Sulfuric acid solution, 5 mM
Sigma-Aldrich
Sulfuric acid solution, 0.25 M
Sigma-Aldrich
Sulfuric acid solution, 0.01 M
Sigma-Aldrich
Sulfuric acid solution, 0.025 M