Saltar al contenido
MilliporeSigma

Benzene, toluene and xylenes levels in new and used vehicles of the same model.

Journal of environmental sciences (China) (2014-02-21)
Joanna Faber, Krzysztof Brodzik, Anna Golda-Kopek, Damian Lomankiewicz
RESUMEN

The aim of this work was to determine the level of benzene, toluene, o-xylene and m, p-xylene (BTX) in air samples collected from the cabins of new and used vehicles of the same model. Ten new vehicles were examined in order to check interior emission from materials used to equip the passenger compartment. In order to compare and define the impact of exhaust gases, air samples were also collected from two used cars, at different mileages (up to 20,000 km). All vehicles tested were of the same type. Samples were collected onto Carbograph 1TD sorbent, thermally desorbed and examined with the use of gas chromatography with flame ionisation and mass spectrometry detectors. All results obtained were referred to Polish and German requirements for indoor air quality (both in public buildings and in workspace environments). Average benzene, toluene, o-xylene and m, p-xylene concentrations in new cars were determined at the level of 11.8 microg/m3, 82.7 micro/m3, 21.2 microg/m3 and 89.5 micro/m3, respectively. In the used cars, BTX concentration increased with increasing vehicle mileage. The most significant increase of BTX concentration was observed above 11,000 km mileage.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Tolueno, suitable for HPLC, 99.9%
Sigma-Aldrich
Tolueno, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Tolueno, anhydrous, 99.8%
Sigma-Aldrich
Benceno, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Benceno, ACS reagent, ≥99.0%
Sigma-Aldrich
Tolueno, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.7% (GC)
Supelco
Benceno, analytical standard
Sigma-Aldrich
Benceno, anhydrous, 99.8%
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Benceno, puriss. p.a., reag. Ph. Eur., ≥99.7%
Supelco
Benzene solution, certified reference material, TraceCERT®, 200 μg/mL in methanol
Supelco
Benceno, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Tolueno, Laboratory Reagent, ≥99.3%
Supelco
Tolueno, analytical standard
Supelco
Tolueno, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Toluene solution, certified reference material, 5000 μg/mL in methanol
Sigma-Aldrich
Tolueno, SAJ first grade, ≥99.0%
Sigma-Aldrich
Tolueno, ACS reagent, ≥99.5%
Sigma-Aldrich
Tolueno, JIS special grade, ≥99.5%
Supelco
Tolueno, HPLC grade, 99.8%
Sigma-Aldrich
Tolueno, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Benceno, JIS special grade, ≥99.5%
Sigma-Aldrich
Tolueno, JIS 300, suitable for residue analysis, ≥99.8%
Sigma-Aldrich
Benceno, SAJ first grade, ≥99.0%
Sigma-Aldrich
Benceno, JIS 300, ≥99.5%, suitable for residue analysis
Sigma-Aldrich
Tolueno, JIS 1000, suitable for residue analysis, ≥99.8%