Saltar al contenido
MilliporeSigma
Get up to 22% off for Pi Day until 3/26.Save Now

Osmotically driven formation of double emulsions stabilized by amphiphilic block copolymers.

Angewandte Chemie (International ed. in English) (2014-06-17)
Jinhye Bae, Thomas P Russell, Ryan C Hayward
RESUMEN

Double emulsions are valuable for the formation of multi-compartmental structures. A variety of pathways to prepare double emulsions have been developed, but high-throughput routes to droplets of controlled size and architecture remain scarce. A new single-step process is introduced for preparation of water-in-oil-in-water double emulsions by a previously unexplained process of self-emulsification. We show that the origin of this process is the osmotic stress resulting from the presence of salt impurities within the amphiphilic block copolymers used for emulsion stabilization. Further, we utilize osmotically driven emulsification to tailor the structures of multiple emulsions, which upon solvent evaporation can yield multi-compartmental capsules or hierarchically structured porous films.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido nítrico, ACS reagent, 70%
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Peróxido de hidrógeno solution, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ácido nítrico, 70%, purified by redistillation, ≥99.999% trace metals basis
Sigma-Aldrich
Peróxido de hidrógeno solution, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Ácido nítrico, puriss. p.a., 65.0-67.0%
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, amylene stabilized
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Peróxido de hidrógeno solution, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.
Sigma-Aldrich
Cloroformo, puriss. p.a., reag. ISO, reag. Ph. Eur., 99.0-99.4% (GC)
Millipore
Peróxido de hidrógeno solution, 3%, suitable for microbiology
Sigma-Aldrich
Cloroformo, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Supelco
Peróxido de hidrógeno solution, ≥30%, for trace analysis
Sigma-Aldrich
Cloroformo, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ácido nítrico, red, fuming, HNO3 >90 %
Sigma-Aldrich
Cloroformo, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Peróxido de hidrógeno solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Ácido nítrico, puriss. p.a., reag. ISO, reag. Ph. Eur., ≥65%
Sigma-Aldrich
Cloroformo, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Cloroformo, biotech. grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ácido nítrico, puriss. p.a., ≥65% (T)
Sigma-Aldrich
Peróxido de hidrógeno solution, purum p.a., ≥35% (RT)