Saltar al contenido
MilliporeSigma

Rapid LC-MS/MS method for determination of drotaverine in a bioequivalence study.

Journal of pharmaceutical and biomedical analysis (2014-07-10)
Szende Vancea, Zsolt Gáll, Gabriella Donáth-Nagy, Réka Borka-Balás
RESUMEN

A liquid chromatography coupled with tandem mass spectrometry method for the quantification of the antispasmodic drug drotaverine in human plasma was developed and validated according to the current bioanalytical guidelines. The internal standard used was imipramine. The separation was performed on a Kinetex C18 50×3mm, 2.6μm column under isocratic conditions using a mobile phase of 65:35 (v/v) formic acid 0.2% (v/v) in water and acetonitrile at 40°C with a flow rate of 0.4ml/min. The detection of drotaverine and the internal standard was performed in multiple reaction monitoring (MRM) mode using an ion trap mass spectrometer with electrospray ionization, operating in positive mode. The human plasma samples (0.24ml) were deproteinized with methanol and aliquots of 4μl from supernatants obtained after centrifugation were directly injected into the chromatographic system. The method shows a good linearity (r(2)>0.997), precision (CV<6.3%) and accuracy (bias<5.4%) over the range of 2.24-448ng/ml drotaverine in plasma. The recovery was between 91 and 98%. The limit of quantification was 2.24ng/ml. The analysis required only a 3.0min run. The developed and validated method for the determination of drotaverine in human plasma was successfully applied in a bioequivalence study, for analyzing approximately 1000 subject's samples.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Metanol, anhydrous, 99.8%
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Metanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Metanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, Absolute - Acetone free
USP
Metanol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Metanol, BioReagent, ≥99.93%
Sigma-Aldrich
Metanol, JIS special grade, ≥99.8%
Supelco
Metanol, analytical standard
Supelco
Metanol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Ácido fórmico, ≥95%, FCC, FG
Sigma-Aldrich
Metanol, SAJ special grade
Sigma-Aldrich
Ácido fórmico, JIS special grade, ≥98.0%
Sigma-Aldrich
Metanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Metanol, suitable for HPLC
Sigma-Aldrich
Formic acid solution, BioUltra, 1.0 M in H2O
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%, poly-coated bottles