Saltar al contenido
MilliporeSigma

PAHs in the Ría de Arousa (NW Spain): A consideration of PAHs sources and abundance.

Marine pollution bulletin (2015-05-12)
Begoña Pérez-Fernández, Lucía Viñas, M Ángeles Franco, Jesica Bargiela
RESUMEN

Analysis of 35 parental and alkylated homologues of PAHs (Polycyclic Aromatic Hydrocarbons) was carried out in eleven marine sediment samples collected along a central transect in the biggest Galician ría. The samples were collected using a box-core dredge and, after freeze-drying, were kept frozen until analysis. The sediments were extracted by PLE (Pressurized Liquid Extraction) procedure and the quantification of PAHs was performed using gas chromatography coupled to mass spectrometry (GC-MS) with the aid of deuterated PAH internal standards. The total concentration of studied PAHs (Σ35PAHs) ranged from 44.8 to 7901ngg(-1) dry weight (d.w.). The highest PAH concentrations were found in sediments collected near the harbour (7901ngg(-1)) and the cleanest positions were located in the outer zone of the ría. To date, these results are the first data presented in the area so they could be used for regular monitoring and control of future pollution episodes.

MATERIALES
Número de producto
Marca
Descripción del producto

Sigma-Aldrich
Hexano, anhydrous, 95%
Sigma-Aldrich
Óxido de alúmina, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Acetona, JIS special grade, ≥99.5%
Sigma-Aldrich
Aluminum oxide, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
Óxido de alúmina, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
Sulfato de sodio, ≥99.99% trace metals basis
Sigma-Aldrich
Sulfato de sodio, BioXtra, ≥99.0%
Sigma-Aldrich
Hexano, JIS special grade, ≥96.0%
Sigma-Aldrich
Acetona, SAJ first grade, ≥99.0%
Sigma-Aldrich
Sulfato de sodio, JIS special grade, ≥99.0%
Sigma-Aldrich
Acetona, ≥99%, FCC, FG
Sigma-Aldrich
Aluminum oxide, nanoparticles, 30-60 nm particle size (TEM), 20 wt. % in H2O
Sigma-Aldrich
Óxido de alúmina, 99.997% trace metals basis
Sigma-Aldrich
Sulfato de sodio, BioUltra, anhydrous, ≥99.0% (T)
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Acetona, natural, ≥97%
Sigma-Aldrich
Óxido de alúmina, single crystal substrate, <0001>
Sigma-Aldrich
Acetona, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Perylene, ≥99%
Sigma-Aldrich
Óxido de alúmina, nanowires, diam. × L 2-6 nm × 200-400 nm
Sigma-Aldrich
Aluminum oxide, mesostructured, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
Hexano, suitable for HPLC
Sigma-Aldrich
Hexano, SAJ first grade, ≥95.0%
Sigma-Aldrich
Perylene, sublimed grade, ≥99.5%
Sigma-Aldrich
Hexano, suitable for residue analysis, JIS 5000
Sigma-Aldrich
Sulfato de sodio, ≥99.0%, suitable for plant cell culture
Sigma-Aldrich
Acetona, suitable for residue analysis, ≥99.5%
Sigma-Aldrich
Hexano, JIS 300, ≥96.0%, suitable for residue analysis
Sigma-Aldrich
Acetona, suitable for HPLC
Sigma-Aldrich
Acetona, ≥99.5%, suitable for residue analysis