Conductivity is not measured at different temperatures to create a correction table. Over typical measurement temperatures, the industry standard is a correction factor of 2% per °C. The CRM should be used to calibrate or confirm the conductivity meter, which should read 25 µmhos/cm at 25 °C. If a reading of 25 µmhos/cm is not obtained, the instrument may require adjustment. Alternatively, the standard correction factor or another factor can be used to calculate acceptance criteria at the measurement temperature.
Fortfahren mit
COND25
Leitfähigkeitsstandard – 25 μmhos/cm
certified reference material
Synonym(e):
25 μmhos/cm Conductivity Calibration Standard
Anmelden zur Ansicht der Organisations- und Vertragspreise.
Größe auswählen
Ansicht ändern
| Größe/SKU | Verfügbarkeit | Preis |
|---|---|---|
500 mL | Warenkorb auf Verfügbarkeit prüfen | € 77,50 |
Über diesen Artikel
NACRES:
NA.24
UNSPSC Code:
41116107
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhaltengrade
certified reference material
Quality Segment
CofA
current certificate can be downloaded
manufacturer/tradename
RTC COND-25-0.500
concentration
in H2O
application(s)
environmental
food and beverages
pharmaceutical
water monitoring
format
single component solution
storage temp.
2-30°C
General description
This ready-to-use certified reference material (CRM) is produced and qualified following ISO 17034 and ISO/IEC 17025. It is manufactured gravimetrically with traceability to SI and higher order standards from National Institute of Standards and Technology (NIST). Its certified value is based on purity determination by mass balance and gravimetrically prepared value. It is delivered in a 500 mL HDPE bottle.
All information regarding metrological traceability, uncertainty, homogeneity and stability is documented in the certificate of analysis (CoA).
All information regarding metrological traceability, uncertainty, homogeneity and stability is documented in the certificate of analysis (CoA).
Application
Suitable for use in calibration of instruments for conductivity measurements.
Other Notes
Die Werte der Analyten sind Lot-spezifisch.
1 of 1
Dieser Artikel | |||
|---|---|---|---|
| description certified reference material | description certified reference material | description certified reference material | description certified reference material, 1000 μg/mL in methylene chloride |
| application(s) environmental | application(s) environmental | application(s) environmental | application(s) environmental |
| format single component solution | format single component solution | format single component solution | format single component solution |
| grade certified reference material | grade certified reference material | grade certified reference material | grade certified reference material |
| manufacturer/tradename RTC COND-25-0.500 | manufacturer/tradename RTC COND-75-0.500 | manufacturer/tradename RTC COND-1412-1 | manufacturer/tradename RTC UST-122 |
| Quality Level 300 | Quality Level 300, 100 | Quality Level 300 | Quality Level 300, 100 |
| concentration in H2O | concentration in H2O | concentration in H2O | concentration 1000 μg/mL in methylene chloride |
Lagerklasse
10 - Combustible liquids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
-
when i use this solution, if the temperature value not 25 Celcius,, example the temperature value is 29 celcius, what value will be read?
1 answer-
Helpful?
-