Fortfahren mit
43354
Abberior® STAR RED NHS
≥80.0% (degree of coupling)
Anmelden zur Ansicht der Organisations- und Vertragspreise.
Größe auswählen
Ansicht ändern
| Größe/SKU | Verfügbarkeit | Preis |
|---|---|---|
1 mg | Warenkorb auf Verfügbarkeit prüfen | € 590,00 |
Über diesen Artikel
NACRES:
NA.32
UNSPSC Code:
12352108
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhaltenQuality Segment
assay
≥80.0% (degree of coupling)
fluorescence
λex 637 nm; λem 660 nm±10 nm in water
storage temp.
−20°C
General description
Abberior STAR RED is an already well known dye named also KK114 in literature (a scientific web search shows more than 60 publications, a selection is listed below). Please note the minimal background signal due to negligible unspecific binding. A key feature of the dye is its comparably long lifetime of ~3.5ns. The dye works exceptionally well with the Abberior Instruments STED microscope as well as with the Leica STED microscope.
Abberior STAR RED can substitute Atto™ 647N, AlexaFluor 647, or Cy®5. It can be excited with diode lasers (635 nm, 650 nm) or with the 647 nm line of a Krypton laser. For STED, a depletion wavelength around 750 nm is recommended. Please see reference [2] for detailed characteristics.
Best results are obtained with freshly prepared samples.
Abberior STAR RED can substitute Atto™ 647N, AlexaFluor 647, or Cy®5. It can be excited with diode lasers (635 nm, 650 nm) or with the 647 nm line of a Krypton laser. For STED, a depletion wavelength around 750 nm is recommended. Please see reference [2] for detailed characteristics.
Best results are obtained with freshly prepared samples.
Application
Abberior® STAR RED labelled cholesterol analogs were used for STED-FCS (stimulated emission depletion - fluorescence correlation spectroscopy) based measurements of membrane diffusion dynamics. Anti-mouse secondary antibody coupled to Abberior® STAR RED has been used for STED microscopy imaging in Vero cell line.
Designed and tested for fluorescent super-resolution microscopy
Other Notes
Legal Information
Atto is a trademark of Atto-Tec GmbH
Cy is a registered trademark of Cytiva
abberior is a registered trademark of Abberior GmbH
1 of 1
Dieser Artikel | |||
|---|---|---|---|
| description ≥80.0% (degree of coupling) | description for STED application | description suitable for fluorescence | description for STED application |
| fluorescence λex 637 nm; λem 660 nm±10 nm in water | fluorescence λex 583 nm; λem 605.0 nm±10 nm in PBS, pH 7 | fluorescence λex 634 nm; λem 654 nm±10 nm in PBS, pH 7.4 | fluorescence λex 635 nm; λem 655 nm±10 nm in PBS, pH 7.4 |
| assay ≥80.0% (degree of coupling) | assay ≥70.0% (degree of coupling) | assay - | assay - |
| storage temp. −20°C | storage temp. −20°C | storage temp. −20°C | storage temp. −20°C |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
Lagerklasse
11 - Combustible Solids
Was ist los?
WGK 3
Flammpunkt (°F)
Not applicable
Flammpunkt (°C)
Not applicable
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.