The item is not sterile and not specifically tested for use in cell culture or mouse models. Based on the reported particle size (500 nm), density (1.05 g/cm³), and solids content (10%), the suspension contains approximately 1.5 × 10¹² particles per milliliter. Should a sterile preparation be required, consider pasteurization instead of autoclaving. Pasteurization involves heating a suspension of the beads for 24 hours at 70-80 degrees C. Polystyrene will soften at autoclave temperatures and then aggregate upon cooling.
Fortfahren mit
59769
Mikropartikel auf Polystyrolbasis
size: 500 nm
Synonym(e):
Latex-Beads aus PS
Anmelden zur Ansicht der Organisations- und Vertragspreise.
Größe auswählen
Ansicht ändern
| Größe/SKU | Verfügbarkeit | Preis |
|---|---|---|
5 mL | Warenkorb auf Verfügbarkeit prüfen | € 319,00 |
10 mL | Warenkorb auf Verfügbarkeit prüfen | € 565,00 |
Über diesen Artikel
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhaltenQuality Segment
form
aqueous suspension
concentration
10% (solids)
technique(s)
protein detection: suitable
particle size
500 nm
density
1.05 g/cm3
storage temp.
2-8°C
General description
Micro Particles or Latex Beads, commonly known as polystyrene microparticles, are negatively charged colloidal particles. The microparticles are produced through a polymerization reaction of styrene under controlled conditions. The conducive environment of the reaction induces spontaneous coalescent bead formation. Micro Particles or Latex beads are supplied in aqueous solutions composed of polymer particles with water. Polystyrene′s refractive index at 589 nm is 1.5905 and 1.602 at 486 nm.
Application
Micro Particles or Latex Beads is used for a wide variety of applications like:
- Electron Microscopy.
- Cell Counter Calibration.
- Immunodiagnostics, especially for latex agglutination tests, and
- Phagocytosis Research.
Analysis Note
Für jede Charge werden die exakte Partikelgrösse und die Standardabweichung mit einer Genauigkeit von 0.01 μm unter Verwendung eines Coulter Multisizers bestimmt.
1 of 1
Dieser Artikel | |||
|---|---|---|---|
| description size: 500 nm | description size: 200 nm | description size: 600 nm | description size: 200 μm |
| particle size 500 nm | particle size 200 nm | particle size 600 nm std dev ≤0.03 μm | particle size 200 μm std dev <4 μm |
| form aqueous suspension | form aqueous suspension | form aqueous suspension | form aqueous suspension |
| concentration 10% (solids) | concentration 10% (solids) | concentration 10% (solids) | concentration 10% (solids) |
| density 1.05 g/cm3 | density 1.05 g/cm3 | density 1.05 g/cm3 | density 1.05 g/cm3 |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C |
Still not finding the right product?
Explore all of our products under Mikropartikel auf Polystyrolbasis
Lagerklasse
10 - Combustible liquids
Was ist los?
WGK 3
Flammpunkt (°F)
Not applicable
Flammpunkt (°C)
Not applicable
PSA (Persönliche Schutzausrüstung)
Eyeshields, Gloves
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
-
Is this a sterile product and suitable for cell culture and mouse models? How many particles are present per mL?
1 answer-
Helpful?
-
-
Are the microparticles suitable for direct use in aseptic experiments (e.g. tissue culture)? If no, how may they be sterilised for such work?
1 answer-
This product has not been tested specifically in tissue culture applications. As polystyrene is not autoclavable, they would need ethylene oxide gas sterilization or gamma irradiation for aseptic experiments.
Helpful?
-
-
What is the Mw of the PS microsphere?
1 answer-
The molecular weight of the polystyrene has not been determined.
Helpful?
-
-
We would like to use the PSL for an aerosol particle generator. Is there any recommended dilution?
1 answer-
This solution contains 10% solids. The product is not tested for suitability in any specific application. The end user would have to determine the appropriate dilution, experimentally. A suggestion would be to initially try the solution neat followed by further serial 2 or 4 fold dilutions in an attempt to determine the optimum concentration for the application. Please see the links below to review publications which may be helpful:
https://www.tandfonline.com/doi/full/10.1080/02786826.2013.868594
https://www.tandfonline.com/doi/full/10.1080/02786826.2018.1505032
Helpful?
-
-
Does the material with part number 59769 contain surfactant to aid in dispersibility? Also, what is the pH of this material?
1 answer-
The product polystyrene microparticles does not contain surfactants and comes in deionized water. The particles have an anionic surface charge due to sulfate groups coming from the initiator in the polymerization reaction. Additionally, the particles’ Zeta potential is in the – 50 mV region over a wide pH range from approximately 2 through 10.
Helpful?
-
-
Does this product have surfactants?
1 answer-
Product 59769 - Polystyrene microparticles do not contain surfactants. The polystyrene microparticles are supplied in deionized water.
Helpful?
-