Direkt zum Inhalt
Merck

Metals and oxidative stress in patients with Parkinson's disease.

Annali dell'Istituto superiore di sanita (2005-10-26)
Giovanni Forte, Alessandro Alimonti, Anna Pino, Paolo Stanzione, Sonia Brescianini, Livia Brusa, Giuseppe Sancesario, Nicola Violante, Beatrice Bocca
ZUSAMMENFASSUNG

Twenty-six metals and the oxidative status in 71 patients affected by Parkinson's disease and 44 healthy individuals were compared in order to identify potential biomarkers of the disease. In the patients, the following significant imbalances were found (p < or = 0.05): i) in serum, an increment of Ca, Mg, Ni, Si and V, and a decrement of Cd, Co, Fe, Li, Sn, Zn and Zr; ii) in blood, raised levels of Co, Li, Ni and Si and decreased of Al, Be, Ca, Cd, Fe, Mg, Mo, Sn, Zn and Zr; iii) increased formation of oxidant species and lowered anti-oxidant capacity (p < or = 0.001 for both). Barium, Bi, Cr, Cu, Hg, Mn, Pb, Sb, Sr, Tl and W did not change with the disease. The best discriminating variables between patients and controls were Cd, Co, Fe, Ni and Si in serum (91.2% of cases correctly classified), and Al, Cd, Co, Fe, Mo and Si in blood (98.2% of cases properly classified).

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
L-Cystin, from non-animal source, meets EP testing specifications, suitable for cell culture, 98.5-101.0%
Sigma-Aldrich
Taurin, ≥99%
Sigma-Aldrich
Zink, dust, <10 μm, ≥98%
SAFC
L-Cystin
Sigma-Aldrich
Zink, granular, 20-30 mesh, ACS reagent, ≥99.8%
Sigma-Aldrich
Zink, powder, <150 μm, 99.995% trace metals basis
Sigma-Aldrich
Magnesium, powder, ≥99%
Sigma-Aldrich
Taurin, suitable for cell culture, meets USP testing specifications
Sigma-Aldrich
S-(5′-Adenosyl)-L-Homocystein, crystalline
Sigma-Aldrich
Silizium, powder, −325 mesh, 99% trace metals basis
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 2800, slurry, in H2O, active catalyst
Sigma-Aldrich
L-Cystin, ≥98% (TLC), crystalline
Sigma-Aldrich
Magnesium, purum, for Grignard reactions, ≥99.5%, turnings
Sigma-Aldrich
Quecksilber, ACS reagent, 99.9995% trace metals basis
Sigma-Aldrich
Zinn, ≥99%, powder
Sigma-Aldrich
Magnesium, chips, 6-35 mesh, 99.98% trace metals basis
Sigma-Aldrich
Kupfer, powder, <425 μm, 99.5% trace metals basis
Sigma-Aldrich
Magnesium, turnings, reagent grade, 98%
Sigma-Aldrich
Kupfer, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
Kupfer, powder, 99.99% trace metals basis
Sigma-Aldrich
Mangan, powder, ≥99.9% trace metals basis
Sigma-Aldrich
Calcium, granular, 99%
Sigma-Aldrich
Zinn, powder, <150 μm, 99.5% trace metals basis
Sigma-Aldrich
Nickel, powder, <50 μm, 99.7% trace metals basis
Sigma-Aldrich
Aluminium, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
Zink, foil, thickness 0.25 mm, 99.9% trace metals basis
Sigma-Aldrich
Titan, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
L-Cystin, ≥99.7% (TLC)
Sigma-Aldrich
Magnesium, ribbon, ≥99.0% Mg basis
Sigma-Aldrich
Nickel, nanopowder, <100 nm avg. part. size, ≥99% trace metals basis