Direkt zum Inhalt
Merck
  • Broad spectrum analysis of polar and apolar organic compounds in submicron atmospheric particles.

Broad spectrum analysis of polar and apolar organic compounds in submicron atmospheric particles.

Journal of chromatography. A (2015-06-10)
Marta Fontal, Barend L van Drooge, Jordi F López, Pilar Fernández, Joan O Grimalt
ZUSAMMENFASSUNG

A method for the quantitative analysis of organic compounds on submicron particulate matter (PM1) collected on quartz filters was developed. The compounds analyzed encompassed C22-C35 alkanes, polycyclic aromatic hydrocarbons (PAHs), quinones, levoglucosan, cis-pinonic acid and short chain dicarboxylic acids such as malonic, succinic, glutaric, adipic, suberic, azelaic, malic and phthalic acids. The method included extraction with a pressure liquid extraction system, sample filtration though glass fibre filter, fractionation by high performance liquid chromatography and subsequent analysis by gas chromatography coupled to mass spectrometry. The study of the extraction efficiency of different solvent mixtures showed that DCM:MeOH 1:1 was the one providing the highest recoveries for all compounds. Extraction temperatures of 100°C provided better results than 60°C or 80°C. This method provided comparable extraction efficiency and qualitative and quantitative data to those involving Soxhlet extraction. Method recoveries for alkanes, most PAH, quinones and polar compounds calculated from spiked real samples were 52-72%, 78-101%, 50-62% and 76-104%, respectively, reproducibilities were 2-28%, 7-29%, 10-27% and 5-28%, respectively, limits of quantification were 0.01-0.1ng/m(3), 0.01-0.27ng/m(3), 0.04ng/m(3) and 0.32-2.8ng/m(3), respectively, which affords the quantification of a broad number of primary and secondary organic constituents of submicron aerosols.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Dichlormethan, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Pyridin, anhydrous, 99.8%
Sigma-Aldrich
Chlorotrimethylsilan, ≥98.0% (GC)
Supelco
N,O-Bis-(trimethylsilyl)-trifluoracetamid mit Trimethylchlorsilan, with 1% trimethylchlorosilane, derivatization grade (GC derivatization), LiChropur
Sigma-Aldrich
N,O-Bis(trimethylsilyl)trifluoracetamid, ≥99%
Sigma-Aldrich
Benzo[a]pyren, ≥96% (HPLC)
Sigma-Aldrich
Chlorotrimethylsilan, purified by redistillation, ≥99%
Sigma-Aldrich
9-Fluorenon, 98%
Sigma-Aldrich
Pyren, 98%
Sigma-Aldrich
Anthracen, ReagentPlus®, 99%
Sigma-Aldrich
Fluoren, 98%
Sigma-Aldrich
Bernsteinsäure, BioReagent, BioRenewable, suitable for cell culture, suitable for insect cell culture
Sigma-Aldrich
Bernsteinsäure, ACS reagent, ≥99.0%
Sigma-Aldrich
Anthrachinon, 97%
Sigma-Aldrich
Anthracen, reagent grade, 97%
Sigma-Aldrich
Benzo[ghi]perylen, 98%
Sigma-Aldrich
Pyridin, ≥99%
Sigma-Aldrich
Bernsteinsäure, BioXtra, BioRenewable, ≥99.0%
Sigma-Aldrich
Bernsteinsäure, ReagentPlus®, BioRenewable, ≥99.0%
Sigma-Aldrich
1,6-Anhydro-β-D-glucose, 99%
Sigma-Aldrich
Pyren, puriss. p.a., suitable for fluorescence, ≥99.0% (GC)
Sigma-Aldrich
Korksäure, 98%
Sigma-Aldrich
Aceton, ≥99%, FCC, FG
Sigma-Aldrich
Trifluoracetamid, 97%
Sigma-Aldrich
Benz[a]anthracen, 99%
Sigma-Aldrich
Dichlormethan, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Fluoranthen, 98%
Sigma-Aldrich
Aceton, natural, ≥97%
Sigma-Aldrich
Benzo[b]fluoranthen, 98%